Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Twin system on a td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Twin system on a td42

Post by Tomo_89 »

Anyone ever done a 1 into 2 exhaust system for there patrol.. was thinkin about doin it when i get the new turbo. i reckon it would soun horn but would it affect the performance? ie. not enough back pressure?

any info would be great
cheers
Tomo
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

the turbo provides all the backpressure you need while off boost , once boosting you dont want any backpressure
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

I think I new dump pipe and 4" exhaust would be a hell of a lot easier. And since you have a ute, just cut it off so it finishes just behind the cab.
THOUGHT FOR THE DAY....
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

turps wrote:I think I new dump pipe and 4" exhaust would be a hell of a lot easier. And since you have a ute, just cut it off so it finishes just behind the cab.
x2

And as said, less back pressure on a turbocharged motor is better. Plus having TWO exhaust pipes means twice the work, twice the cost, and twice as much shit to get bent/broken.

Coxy
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

coxy321 wrote:
turps wrote:I think I new dump pipe and 4" exhaust would be a hell of a lot easier. And since you have a ute, just cut it off so it finishes just behind the cab.
x2

And as said, less back pressure on a turbocharged motor is better. Plus having TWO exhaust pipes means twice the work, twice the cost, and twice as much shit to get bent/broken.

Coxy
but you could fit 2x Milo tins on it
Top
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

bogged wrote:
coxy321 wrote:
turps wrote:I think I new dump pipe and 4" exhaust would be a hell of a lot easier. And since you have a ute, just cut it off so it finishes just behind the cab.
x2

And as said, less back pressure on a turbocharged motor is better. Plus having TWO exhaust pipes means twice the work, twice the cost, and twice as much shit to get bent/broken.

Coxy
but you could fit 2x Milo tins on it
:rofl: gotta have the milo.. makes you go and go and go. lol
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

bogged wrote:
coxy321 wrote:
turps wrote:I think I new dump pipe and 4" exhaust would be a hell of a lot easier. And since you have a ute, just cut it off so it finishes just behind the cab.
x2

And as said, less back pressure on a turbocharged motor is better. Plus having TWO exhaust pipes means twice the work, twice the cost, and twice as much shit to get bent/broken.

Coxy
but you could fit 2x Milo tins on it
See I never thought of the milo tins. They have to be good for 10hp.
THOUGHT FOR THE DAY....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:
bogged wrote:
coxy321 wrote:
turps wrote:I think I new dump pipe and 4" exhaust would be a hell of a lot easier. And since you have a ute, just cut it off so it finishes just behind the cab.
x2

And as said, less back pressure on a turbocharged motor is better. Plus having TWO exhaust pipes means twice the work, twice the cost, and twice as much shit to get bent/broken.

Coxy
but you could fit 2x Milo tins on it
See I never thought of the milo tins. They have to be good for 10hp.
hiclone FITTED Milo tins.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests