Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series lsd

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

80 series lsd

Post by mav »

what is the best way to tighten a 80 series lsd to keep it working???
see ya mav
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

Don't bother !
All Toyota's LSD are no good, A tightly packed LSD can fail after one outing. Beter off with a locker i recon.
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Posts: 668
Joined: Mon May 19, 2003 4:49 pm
Location: Gold Coast

Post by Pesky Pete »

I agree with Kev. Mine is totally shagged and I think that to pay the $300 or so to shim or tighten a LSD is a waste. Save it for when you can buy a locker.

Cheers

Peter
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Hi
If you tighten an 80 lsd, it will wear out the clutches faster and the gears will then get less contact/more slop.
I have heard there is a good oil you can use in them that is 85/140, and makes them a little better.
Other than that, save up for an ARB locker.
Andrew
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

Guys - Punchy had a top idea that got his working ace - just ask him - I haven't done it yet - diff comes out next week!!!

I may even chuck a detroit in the rear yet!
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

heheh thanx for the plug :P

really mine isnt any different to most others
i check the spring for tension
measure the collapsed hieght and install shims to suit

the only thing i can say is after a period of 12 months and say 10, 000 k of driving and a few bit of hard yakka it only let me down once..

But seriously what i was doing really needed a locker
For most "normal" and both wheels on the ground stuff the tightened limo works

get the sway bars off..get the flex going and keep both tyres on the ground to help..

beebee has one of my reconditioned limos in the back of his rig as well..

Doesn't break, provided stable traction, and was one of the few people to negotiate CP1 of the annual logan extreme nightrun.
winch was needed as well..but it was doing well none the less and its still in there.


i wouldn't put the locker in the back of your 80. I had one. drove me nuts and really unsettles the truck in big long corners.

i took it out and put in in the back of my 75 ute. Damn thing sqeaked and chirped the tyres everywhere and was shit and unpleasant to drive

Took it out of there and wacked it in the front and put fatasses old limo in the back shimed up.
Works a treat now ! and drives A1.

In the end my opinion is air locker
have the choice of normal everyday diff for general driving and flick a switch for leet rock action !
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests