Tech Talk for Nissan owners.
Moderators: toaddog , V8Patrol
Posts: 21 Joined: Fri Jul 11, 2008 12:17 pm
Location: Melbourne
Post
by Sammys Gu » Thu Sep 25, 2008 11:13 am
My Gu Ute 99model 4.2TD has lost heaps of power. It only revs out to about 2grand now and instead of the usual 9pound boost it only reaches about 5 pound. Does anyone have any ideas of the problem?
Thanks
Posts: 239 Joined: Thu Aug 07, 2003 2:27 pm
Location: Mongol land
Post
by GeneralFubashi » Thu Sep 25, 2008 12:09 pm
someone jammed a rag down your snorkle?
could also be that your fuel filters are so clogged that nothing is getting through?
Sam
Posts: 21 Joined: Fri Jul 11, 2008 12:17 pm
Location: Melbourne
Post
by Sammys Gu » Thu Sep 25, 2008 12:12 pm
i replaced the fuel filter only about a month ago
Posts: 45681 Joined: Wed Nov 27, 2002 10:13 am
Post
by bogged » Thu Sep 25, 2008 12:13 pm
Sammys Gu wrote: i replaced the fuel filter only about a month ago
did it start losing power at about this time?
What condition was the filter in? did you drain it to see if it had chit in it?
You bought fuel at same place? Maybe a bad batch of fuel??
Air filter? but sounds like filter or pump issue.
Posts: 21 Joined: Fri Jul 11, 2008 12:17 pm
Location: Melbourne
Post
by Sammys Gu » Thu Sep 25, 2008 12:21 pm
No it only started losing power about a week ago and i did drain the filter and there was no water in it or any other shit.
It could be bad fuel but how would i tell if that was the case?
I hope its not a pump issue, heard they are costly
Posts: 45681 Joined: Wed Nov 27, 2002 10:13 am
Post
by bogged » Thu Sep 25, 2008 12:43 pm
Sammys Gu wrote:
It could be bad fuel but how would i tell if that was the case?
I hope its not a pump issue, heard they are costly
Drain the tank into a drum.. change filter, go get fuel elsewhere, fill tank and prime system.
pumps arent that bad round 2grand.
Posts: 21 Joined: Fri Jul 11, 2008 12:17 pm
Location: Melbourne
Post
by Sammys Gu » Thu Sep 25, 2008 1:13 pm
ill try that, thanks mate
Posts: 2254 Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney
Post
by jessie928 » Thu Sep 25, 2008 1:19 pm
i redskin its the filter beneath the banjo fitting on zi injector pump.
you need to fish it out and clean it up.
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 2832 Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC
Post
by RoldIT » Thu Sep 25, 2008 1:53 pm
Last edited by
RoldIT on Thu Sep 25, 2008 1:56 pm, edited 1 time in total.
KRiS
Posts: 1067 Joined: Mon Nov 29, 2004 12:24 pm
Location: sydney
Post
by hienuf » Thu Sep 25, 2008 1:54 pm
Mate it sound's like a boost leak.
PATROL 2007 ST-L 4.8
3inch Lift, 35inch mtz, Rockhoppers
"POWER DEMANDS RESPECT"
Posts: 1041 Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria
Post
by Mudzuki » Thu Sep 25, 2008 3:55 pm
Is it new enough to have the EGR valve?
If so, the tube is prone to cracking and releasing exhaust gas, preventing boost. Just a thought ...
Posts: 67 Joined: Sun Mar 06, 2005 6:20 pm
Location: central coast
Post
by 4b kidd » Thu Sep 25, 2008 5:19 pm
definatly the little filter under the banjo fitting on
top off the injector pump.
gq 4.2 td,35s,fr air locker,soon to be extra cab
Posts: 292 Joined: Wed Jan 11, 2006 11:49 am
Location: Seville Vic
Post
by MICK77 » Thu Sep 25, 2008 5:25 pm
Sounds like this will be your problem.
[quote="bogged"]
Whats that old saying that I've modernized for this scenario
"fuked over once, shame on her, fuked over twice, shame on me."
(c) Bogged 2008[/quote]
Posts: 1258 Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria
Post
by PGS 4WD » Thu Sep 25, 2008 9:41 pm
jessie928 wrote: i redskin its the filter beneath the banjo fitting on zi injector pump.
you need to fish it out and clean it up.
Jes
x2
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 715 Joined: Wed Dec 03, 2003 10:19 am
Location: walloon, queensland
Post
by jav » Fri Sep 26, 2008 1:13 am
PGS 4WD wrote: jessie928 wrote: i redskin its the filter beneath the banjo fitting on zi injector pump.
you need to fish it out and clean it up.
Jes
x2
x3
Posts: 21 Joined: Fri Jul 11, 2008 12:17 pm
Location: Melbourne
Post
by Sammys Gu » Fri Sep 26, 2008 9:02 am
thanks for your help, ill sus it out on the weekend
Posts: 21 Joined: Fri Jul 11, 2008 12:17 pm
Location: Melbourne
Post
by Sammys Gu » Fri Sep 26, 2008 6:23 pm
Thanks guys just pulled out the gauze filter from under the banjo fitting and guess what it was blocked. Never doubted you guys.
Posts: 2832 Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC
Post
by RoldIT » Sat Sep 27, 2008 1:59 am
We rule!!!!
I always service/clean mine at every oil change now. Keeps it pretty tip top ...
KRiS
Users browsing this forum: No registered users and 55 guests