gu diff

Post by **tailpipes** » Mon Sep 29, 2008 5:12 pm

just want to know whats involed in trasfering gu front diff to gq chassis?, does every thing bolt straight in besides the draglink to streering box? will gu pitman arm bolt onto gq box? and i got gq center with a arb locker will it bolt into gu housing?

Post by **Shorty88** » Mon Sep 29, 2008 6:58 pm

yeah m8 all bolts up pritty shaw u have to use the gu steer box not just the pitman arm. n with ur centre u will have to remove the thrust block between the spider gears otherwise the axels wont fit. have fun

Post by **nastytroll** » Mon Sep 29, 2008 7:49 pm

depends how old the airlocker is, it may not have a thrust block.

Post by **michael a** » Mon Sep 29, 2008 9:22 pm

I had to cut axels down as very old airlocker thrust block not removable.

I cut about 5mm off the end of both axles it worked a treat.

Post by **tailpipes** » Tue Sep 30, 2008 4:01 pm

what about tail sharft and brakelines do they all hook up ?

Post by **broken80** » Tue Sep 30, 2008 6:10 pm

front shaft and brakelines are straight boltup.

Post by **tailpipes** » Tue Sep 30, 2008 7:21 pm

cheers 4 that broken80 got seriours front end problems

Outer Limits 4x4 Board

gu diff

gu diff

Who is online