Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2 inch body lift for 06 jimny

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 7
Joined: Tue Sep 30, 2008 3:23 am
Location: Sunny Coast

2 inch body lift for 06 jimny

Post by Mando »

Hi is there anyone out there who has done a 2 inch body lift on a 06 built jimny. if so was it easy enough and do you have any pointers for me that will make it all work smoothly and be ready to pass compliance? Thanks Mando :?:
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

PM Squik, I have sold her one of my kits. She will most probably put you in contact with Darren, I think, who actually did the install.
;)
Top
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

Yeah but Squik's is a Series 1 (no airbags). Don't think you'll be able to get a bodylift engineered on an airbag equipped vehicle.
Top
Posts: 7
Joined: Tue Sep 30, 2008 3:23 am
Location: Sunny Coast

Post by Mando »

i thought as much but ill keep trying to find an answer. stupid :bad-words: airbags....Does anyone know this for sure to put me out of my misery?
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I doubt a BL would affect the sensors for the airbags, wouldn't it just be some sensors in the front bar with a harness? If the harness doesn't stretch too much what would be the problem?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 7
Joined: Tue Sep 30, 2008 3:23 am
Location: Sunny Coast

Post by Mando »

i'm getting closer to an answer and i may be on to someone within nbs4x4club.com (north brisbane suzuki) they have some interesting tech stuff there for all zooks as it is a zook club give them a look i found all compliance stuff and regulations there.. cheers ,,, P.S.im still wanting answers so keep them coming please.
Top
Posts: 12
Joined: Tue Sep 11, 2007 5:39 pm
Location: Sydney

Post by Davo »

Hey mate mine is a series 2 M13a year 2001 with dual airbags and i have the 3 inch Snake Racing body lift engineered on my jimny....but i will tell you ...it was not easy finding someone that would pass a body lift with airbags. Most engineers you ring up don't want to know about it once they know it has airbags.
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

our process in Qld is different for approvals, the vehicles gets inspected by the Transport Department and you must gain pre approval before undergoing any works
;)
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

approval..pfft



don't listen to me
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

Have done a couple of body lifts on 05/06 jimneys air bags no problems, have only done 2" though recon it would be fun with shifters using a 3" lift
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests