Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Location of Oil Pressure sender on 2.8TD in NJ Pajero

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 35
Joined: Tue Mar 07, 2006 10:44 pm
Location: 4wding around SEQueensland

Location of Oil Pressure sender on 2.8TD in NJ Pajero

Post by nudge2325 »

As the title says i need to know the location of the pressure sender on a 94 NJ 2.8Turbo Diesel.

Im guessing its somewhere near the oil filter but i cant see it from underneath and the turbo is in the way from the top.

The reason i need to find it is the guage inside reads zero all the time and either its dead or not connected.


Thanks for the info

Nudge
1994 80 Series Land Cruiser GXL
Posts: 31
Joined: Thu Aug 05, 2004 6:14 pm

Post by greybeard »

here's a copy of the engine manual
http://adamsgarage.com/Manuals/4M40_Manual.pdf
it's abot 3.5Mb in size.
Posts: 1
Joined: Fri Feb 02, 2007 7:30 pm

Post by Asterix »

if you look carefully you can see the blue spade terminal that i replaced the faulty factory plug with and my guage started to work again after that.
the sender is under the intercoller on the left near the top radiator hose.http://memimage.cardomain.com/member_im ... 291702-279
Posts: 35
Joined: Tue Mar 07, 2006 10:44 pm
Location: 4wding around SEQueensland

Post by nudge2325 »

Thanks for the replies. Problem is solved now.
1994 80 Series Land Cruiser GXL
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests