hi guys, i have an 80 series cruiser,95 VX manual etc etc etc ... wanting to put an ARB bull bar on it on a budget. have heard that a 100 series will fit with minor bracket modifications? have found a well looked after second hand 100 series bar so keen to mod it on.
just wondering what the main diferences are between the 80 and 100 series other than the obvious IFS thing. are the chassis rails spaced differently etc ?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
silly ARB bull bar question...
Moderators: toaddog, Elmo, DUDELUX
silly ARB bull bar question...
If you allready know everything, DONT ask fcuking Questions!!
the way i figure it theres nothing a grinder and a welder cant fix, so i bought the bar and mounting hardware,has cost me about half the price of a new one and after i modify the mounts it will be primo, the 100 series has a much wider chassis so all i have to do is mod the mounting plates by cutting the feet off and spacing them to fit my 80 series chassis and blaze it all together and bolt it up.... sounds easy eh ! 
will post a pic or two if i remember
will post a pic or two if i remember
If you allready know everything, DONT ask fcuking Questions!!
I put a ifs hilux bar on my 80 series
and i fitted a hilux body as well
everyone said it would not fit but it did and it is my daily driver
as long as you are willing and able to carry out some mods then anything is posible
and i fitted a hilux body as well
everyone said it would not fit but it did and it is my daily driver
as long as you are willing and able to carry out some mods then anything is posible
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
the bar is fitted and i would say its better than the 80 series bar !,
fair bit of messing around with mounting but the bar itself is better, has more side protection as the sides come right up and over the bottom of the flares for protection. looks good to.
will post a pic or two when i find my camera...
grinder and welder... what more do you need ! ?
fair bit of messing around with mounting but the bar itself is better, has more side protection as the sides come right up and over the bottom of the flares for protection. looks good to.
will post a pic or two when i find my camera...
grinder and welder... what more do you need ! ?If you allready know everything, DONT ask fcuking Questions!!
Who is online
Users browsing this forum: No registered users and 1 guest