Thanks Jas.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Powersteering dilemma
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Powersteering dilemma
Can anyone tell me which is the high pressure and which is the return line fittings?
Thanks Jas.
Thanks Jas.
whats it off?
did you pull it out and not look? or is it a new one? if its a new one check your existing set up, high pressure will have crimped fittings, low pressure will have std hose clamps.
on my vehicle the rhs one nearer to the input shaft is the low pressure line, but your box is a bit different to mine so....
did you pull it out and not look? or is it a new one? if its a new one check your existing set up, high pressure will have crimped fittings, low pressure will have std hose clamps.
on my vehicle the rhs one nearer to the input shaft is the low pressure line, but your box is a bit different to mine so....
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
I know on my box the this was all identical, just that one line was solid the other was clamps etc.joel HJ60 wrote:Does one have a larger hole, or more threads? A taper? sealing surface? Something different from the other?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
The hole with the silver ring around it is slightly smaller. Thread is the same pitch.joel HJ60 wrote:Does one have a larger hole, or more threads? A taper? sealing surface? Something different from the other?
It's a Suzuki Sierra box. My car didn't have PS.thehanko wrote:whats it off?
did you pull it out and not look? or is it a new one? if its a new one check your existing set up, high pressure will have crimped fittings, low pressure will have std hose clamps.
on my vehicle the rhs one nearer to the input shaft is the low pressure line, but your box is a bit different to mine so....
I'm fitting this box with a Celica pump and lines. I have to rebend the lines and get the fittings at the box end changed.
Jas.
Who is online
Users browsing this forum: No registered users and 2 guests