Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brake lines

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 324
Joined: Thu Aug 09, 2007 11:18 am
Location: Sydney

Brake lines

Post by Evski »

Hey guys, just bought a 1995 dual cab ln106 hilux with a lift in it (thinking around 2") and noticed that when stretched out the front brake lines are maxed out. Im kind of pissed as I wanted to go up to lithgow tomorrow. Is there a good supplier in sydney for extended lines or does anyone on the forum have some lying around? Is there a wrecking yard option?
Cheers guys
Top
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

If you buy second hand ones you will just end up with the same old dramas.
A brake shop should be able to crimp up some extended brake lines for you, but spend the extra $$ and get the braided steel ones if you can.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Top
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

Post by gutlux44 »

pull the little steel clip out that holds the line to the bracket. will give you plently of slack until you get new ones made.
Top
Posts: 116
Joined: Mon Aug 25, 2008 7:30 pm
Location: Rocky Cq

Contact:
Contact buggerluxkid

Post by buggerluxkid »

the other thing you could do but its very bodgy and your better off disconnecting the steel clip. using a shifter or somethin similar, bend the chassis mount around and down, it should get you enough slack. but if you can wait a few days either go to the Superior engineering website www.superiorengineering.com.au, or snake racing, www.snakeracing.com.au. or i sure a hose mob down there should be able to make somethin up. or have a yarn to a mechanic he'd know someone who does em locally, or a place like arb, tjm or opposite lock should be able to lead you in the right direction.

cheers hope that helped.
WAS

92' tuff lux 2.8 TD, 33" muddies, 2 inch body and tray, 2 inch suspension

NOW
4.2 L turbo deisel gq, double locked, 33's, 3 inch lift, 30 mm Body lift.
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

As previously said spend the extra $$ and get the braided steel lines.

I had a mobile guy come do mine and my mates trucks while we were at work. No fuss and no time taken out of my day ;)
Kind Regards,
Brad
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

i paid $70 for a pair of 700mm long rubber ones when i had my 2" lift done- just rang a brake place, said 2 at 700mm to suit a hilux and picked em up later that day
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 338
Joined: Wed May 23, 2007 6:11 pm
Location: Sydney

Contact:
Contact Buggerific

Post by Buggerific »

Dont know what part of sydney but im in the northern beaches so all I know of is warringah brake and clutch in brookvale.
Ozkor Auto Tech - 51 Orchard Road, Brookvale

1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
Top
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

If your over Campbelltown way, Martins clutch and brake can make them up, just measure what ya want and take a line in for a sample, there's also a place over Fairfield way and another near Peachtree in Penrith
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest