Got some questions in regards to what people have done about fitting a single din cd player into a HZJ105R crusier. I have bought a new Kenwood cd player and removed the orignal double din tape player only to find that the stero face leaves about 10mm gap either side. Not only that but when I went to fit my GME TX3200 UHF and din face underneath the cd player I found the height is to bloody short and can't fit it either.
Any one got any pics of what they have done?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HZJ105 CD player ???
Moderators: toaddog, Elmo, DUDELUX
HZJ105 CD player ???
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
I put the CD player on the bottom and the TX 3200 on top of the CD player. Mine was only a single din from factory and the was a cover plastic plate on top of the OME tape deck.
With the plastic cover there was a raised bit in the center, i just cut that out and the TX3200 fitted perfect. BUT i do still have a 10mm gap around the CD player that i will infill with some black perspex.
With the plastic cover there was a raised bit in the center, i just cut that out and the TX3200 fitted perfect. BUT i do still have a 10mm gap around the CD player that i will infill with some black perspex.
if ya gona rev it, Chev it
My 06 HZJ105 had the oversized double DIN stereo also. I fitted a plastic coin/junk tray under mine which came with extra's to fill in the sides.
Avail from Strathfield Car mob approx $30
Avail from Strathfield Car mob approx $30
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
Cheers, I will look into the kit. Might have to mount the uhf some where else.Sixty wrote:My 06 HZJ105 had the oversized double DIN stereo also. I fitted a plastic coin/junk tray under mine which came with extra's to fill in the sides.
Avail from Strathfield Car mob approx $30
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Who is online
Users browsing this forum: No registered users and 0 guests