my dads 92 laser with a 1.6 carby engine wouldnt start yesterday and we figured it was a faulty coily and the racq towee suggested ignition moduel. put i a new champion coil today and it started, ran for 1 minute then stopped again and wouldn't start again???
so as i dont know a great deal in this area is it a faulty new coil or is it the moduel? why did it run for a minute then stop?
advice greatly appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
faulty coil or moduel???
Moderator: -Scott-
faulty coil or moduel???
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
I have the same problem with a '93 magna.
Ignition modules for these older cars are relatively cheap however, they dont seem to last long.
Does anyone have any advice as to why?
I also noticed once it stopped running properly, if i let it cool down it'll work for a minute or so too, sometimes 5-10 mins.
I take it once its cooked its stuffed? anything I can do to prevent it cooking ?
They are cheap but inconvenient buggers to replace
Sorry if this is Off topic.
Ignition modules for these older cars are relatively cheap however, they dont seem to last long.
Does anyone have any advice as to why?
I also noticed once it stopped running properly, if i let it cool down it'll work for a minute or so too, sometimes 5-10 mins.
I take it once its cooked its stuffed? anything I can do to prevent it cooking ?
They are cheap but inconvenient buggers to replace
Sorry if this is Off topic.
It seems when I buy the modules they come with paste, however over time it seems to melt away leaving it dry and causin the module to malfunction.simkell wrote:when replacing them ensure that you use the paste that is recommended for the module. it helps to transfer the heat out of the module into the dizzie.
Does anyone know where I can get similar paste? I tried dicksmith and jaycar, but its too thin and just melts off.
Just wondering if anyones tried relocating the module and a way to keep it cool?
maybe this is just a magna thing, after all its a cheap piece of crap
Know SFA about Lazers but amputated the module of my jap dissy and used a remotely mounted BOSCH module and HEI coil...
Shielded lead required from VR pickup to module but works like a charm with significantly higher discharge energy and IMO the particular BOSCH module / coil is a much better unit.
This could all be useless to you but for what its worth......
Shielded lead required from VR pickup to module but works like a charm with significantly higher discharge energy and IMO the particular BOSCH module / coil is a much better unit.
This could all be useless to you but for what its worth......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 13 guests