Hi, could someone supply me a link to installing drop boxes on gq's, think was on here a while back, but cannot find now.
Thanks Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Drop boxes for GQ
Moderators: toaddog, TWISTY, V8Patrol, Moderators
I don't know if this is what you are after. Marks 4WD Adaptors portal axle link http://www.marks4wd.com/products/gearma ... -GQ-GU.htm
John
couldnt find it but went
undo panhard rod and tierod at diff end
undo radius arms at chassis end
push diff forward until radius arms fall out
sometimes front tailshaft is too short so may have to be undone
some dropboxes require a small cut where top of box sits (I cut this first which helped radius arms drop out)
jack under crossmember and undo crossmember bolts
take load off jack just til there is enough room to slide in dropboxes
nip up crossmember bolts
push diff and radius arms back into new position
redo radius arm bolts and crossmember bolts
reconnect tierod and panhard
and try not to do this
http://www.outerlimits4x4.com/ftopic155720-0-0-asc-.php
THICKNICK
undo panhard rod and tierod at diff end
undo radius arms at chassis end
push diff forward until radius arms fall out
sometimes front tailshaft is too short so may have to be undone
some dropboxes require a small cut where top of box sits (I cut this first which helped radius arms drop out)
jack under crossmember and undo crossmember bolts
take load off jack just til there is enough room to slide in dropboxes
nip up crossmember bolts
push diff and radius arms back into new position
redo radius arm bolts and crossmember bolts
reconnect tierod and panhard
and try not to do this
http://www.outerlimits4x4.com/ftopic155720-0-0-asc-.php
THICKNICK
Who is online
Users browsing this forum: No registered users and 4 guests