Hi, I have a '95 cruiser, 4.5 petrol / LPG. 320,000k's total, traveled last 150,000 on LPG.
The car is hard to start on Gas in mornings after running on Petrol. The car will start on Gas, give an initial rev and then cut out. It keeps starting and cutting out on gas. The only way to get it going is to start and drive the car on petrol for a while until it warms up, then you can switch to gas. If you drive the car on gas for a while then it will start the next morning okay on gas.
I hope someone can solve the problem while it's at the mechanic to try and save some $$$$.
Car drives great on gas but poor on petrol due to blocked injectors. The injestors are getting cleaned this week and the car is booked in to get the valves adjusted in about 2 weeks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series LPG / Petrol 4.5 running problem
Moderators: toaddog, Elmo, DUDELUX
80 series LPG / Petrol 4.5 running problem
Cheers.......4by.
G'Day Mate
I had exactly the same problem with my 80, it was caused by the fuel lock control, this takes a pulse from the ignition coil to sense that the engine is running and opens the gas solenoids when it receives this signal, this is why your engine starts for a second when cranking and then stops when the solenoids are not opened by the fuel lock control, costs about $60 and 4 wires to change over so simple DIY job, let me know how you go
I had exactly the same problem with my 80, it was caused by the fuel lock control, this takes a pulse from the ignition coil to sense that the engine is running and opens the gas solenoids when it receives this signal, this is why your engine starts for a second when cranking and then stops when the solenoids are not opened by the fuel lock control, costs about $60 and 4 wires to change over so simple DIY job, let me know how you go
Who is online
Users browsing this forum: No registered users and 85 guests