Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi-mount in ARB Bar

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 60
Joined: Wed Jan 11, 2006 8:34 pm
Location: Townsville

Hi-mount in ARB Bar

Post by Zuki98 »

hi all

i want to run a hi mount winch in an arb bar but need some pics from behind to see if i can make it fit before i go and by 1 if any 1 has some it would begreat if u could post some up.
98 zook xcab lwb coilovers winch and more
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

It's going to be along way off of fitting. The bar will loose most of it's strength by the time you cut the top and back out of it to fit the bulk of the 8274. You'll have to cut the grille and it's supporting panelwork out too.

In any case, the ARB mounts were never designed for that much winch load (or weight!) so the mounts and the end of the chassis won't be happy.

Cool winch, bad application.

I'm fitting one into the back of a 1.0 trayback atm.

You'd be better off starting from scratch than trying to work with the ARB bar.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 60
Joined: Wed Jan 11, 2006 8:34 pm
Location: Townsville

Post by Zuki98 »

its going to be a race car and i wanted to use just the frame of the bar and custom make all the mounts not sure if it will fit on the flat part on the front of the bar tho the winch is also widened 50 mm.
98 zook xcab lwb coilovers winch and more
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

It's too tall. The top will have to come out of the bar. Highmounts use a much bigger drum.

I would have thought for any sort of competition 56KG right out the front of the car would be the last thing you'd want. (even for winch challenges)

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 60
Joined: Wed Jan 11, 2006 8:34 pm
Location: Townsville

Post by Zuki98 »

yeah i see thanks for ur reply mate.
The front diff is way forward so thats not a worry.
98 zook xcab lwb coilovers winch and more
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I see you're in townsville, any more info? throw me a PM with your msn address if you wanna.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

I looked into using an ARB bar with the high mount on my old zuk, ended going for a custom bar as it meant I didn't need to butcher the panels.

Here is a pic, have more if you want them.

Image
Posts: 19
Joined: Tue Jan 24, 2006 5:57 pm
Location: Gove NT

Post by Matty Ducati »

Zuki98 wrote:yeah i see thanks for ur reply mate.
The front diff is way forward so thats not a worry.
By the time you finsh the zuk the jeep will be done :D

Chuck some pics up bob!
Cheers Matty

05 Jeep TJ,4" lift, 35s,ARB bar & IPF spots
Posts: 155
Joined: Mon Jul 10, 2006 11:17 am
Location: Brookvale

WInch

Post by MitchellBros4x4 »

We got a high mount in the ARB low mount bar, we just added some extra plating up the front and a fedw gussets here and there. Its all good.
Mitchell Bros 4x4 & More
16 Chard Road Brookvale NSW 2100
02 9905 4764

http://www.mitchellbros4x4.com.au
http://store.mitchellbros.com.au/rigid- ... led-lights
Posts: 437
Joined: Mon Nov 24, 2003 4:26 pm
Location: back in the bush ;)

Post by germo »

I wouldn't chop an arb bar up, sell it and start from scratch.
if your drum is 50mm wider then your bolt hole won't line up either I would think!

try and get the winch back as far as possible, I moved my radiator and fan back 25mm and cut the grill support!
gave me a good approach angle

Image

the winch in my current truck will be in the rear and fed forward as I want a really good approach, lower weight at the front and a more stock look with a simple bar, as there will be an intercooler in the grill!

just a thought
ashley
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Posts: 60
Joined: Wed Jan 11, 2006 8:34 pm
Location: Townsville

Post by Zuki98 »

thanks for the replys still unsure what i want to do with the bar work just getn ideas
its on wheels matty but duno how to put pics up.
98 zook xcab lwb coilovers winch and more
Posts: 19
Joined: Tue Jan 24, 2006 5:57 pm
Location: Gove NT

Post by Matty Ducati »

email the pics to me and i'll post them up for you.
Cheers Matty

05 Jeep TJ,4" lift, 35s,ARB bar & IPF spots
Posts: 19
Joined: Tue Jan 24, 2006 5:57 pm
Location: Gove NT

Post by Matty Ducati »

Come on bob we want pics!!!!!!!!!!!!!!!!!
Cheers Matty

05 Jeep TJ,4" lift, 35s,ARB bar & IPF spots
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Post by Liam »

Image
Arb bar, modded hi-mount. Never had a drama. bar didn't bend. Just brace the back, you'll be fine.
Image
modded Arb bar, modded low mount, still never had problems.
www.bbmotorsports.com.au
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Why so many winches when you'd rarely get stuck Liam? lol
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Post by Liam »

1.drag mates out
2.piss people off
3. you can always get stuck if you really apply yourself.
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I agree with number 3 totally.

4. Pull youself back on the wheels after a roll :D
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 19
Joined: Tue Jan 24, 2006 5:57 pm
Location: Gove NT

Post by Matty Ducati »

Heres a couple of pics of bob's project, long way to go but its getting there!
are you goin to change the rear arm mounts bob?

http://www.aussiejeepimages.com/gallery ... mId=119288

http://www.aussiejeepimages.com/gallery ... mId=119292
Cheers Matty

05 Jeep TJ,4" lift, 35s,ARB bar & IPF spots
Posts: 60
Joined: Wed Jan 11, 2006 8:34 pm
Location: Townsville

Post by Zuki98 »

nahh just brace them i think then just keep ane eye on em.
98 zook xcab lwb coilovers winch and more
Posts: 60
Joined: Wed Jan 11, 2006 8:34 pm
Location: Townsville

Post by Zuki98 »

hey Liam got any close ups of the front bar
98 zook xcab lwb coilovers winch and more
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

Liam wrote:Image
Arb bar, modded hi-mount. Never had a drama. bar didn't bend. Just brace the back, you'll be fine.
Image
modded Arb bar, modded low mount, still never had problems.
Hay liam have you spaced out your bar ?? every other suzuki i've seen running an ARB bar with a Hi-mount has had to hack the grille and the lower radiator support :?
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

pretty sure he had to hack his as well mate...
he just did a real neat job of it :D (hard to see in photos)
All the gear, No idea...
Post Reply

Who is online

Users browsing this forum: No registered users and 68 guests