Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LIFTING THE 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 3
Joined: Wed Jun 18, 2008 2:26 pm
Location: gold coast

LIFTING THE 80

Post by kiwi03 »

guys want your opinion i got the cash to do either a 4 or a 2 inch on my 80 want to run 35s will be using it mainly for beach work and the odd trip to glass house once a month so help please im on the gold coast as well if you could point me in right direction im new to the goldy cheers
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

Been looking at the 4" Suspension Stuff web site, prices are very good and the kits complete.
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

4inch be plenty.

but will you be bringing on grief in qld??
maybe you should settle for 2inch?

ive got 4inch in my 80. good gear.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 3
Joined: Wed Jun 18, 2008 2:26 pm
Location: gold coast

Post by kiwi03 »

yeah seen those kits was the one i was going to go for but dont know if i want to go that or a 2 inch....plus getting it installed can do all the springs and coils myself just brake lines and other things im not sure on
Posts: 15
Joined: Sat Sep 13, 2008 8:46 pm
Location: North Brisbane

mm

Post by Petrol60 »

I would just go with the 3" Mates Rate Kit from Suspension Stuff, Talk to Shane about it and I am pretty sure like most it will give you around 2" of actual lift.

Besides his prices are awesome and so is his service.
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

Seriously, if you are going to run 35's then get a 4" kit. 35's won't be legal so you may as well have the lift to fit them.
Talk to the guys at BBM, they just done a 4" tough dog kit for my SA 100 for 2750 with free delivery or free fitment. Being about 12hrs north of brisbane, I took the delivery.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Posts: 62
Joined: Sun Jan 04, 2004 12:40 pm
Location: Sunshine Coast

Post by Oneputt »

Mine is theoretically a two inch lift but is probably closer to three, and if I wanted I could run 35s without a problem.
www.oneputtphotographics.com
http://oneputt.redbubble.com/
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

U can run 35's on 2" lift no probs.

2" saves a bit of hassle.. no need for longer brake lines, can stull use std panhard, it wont affect your castor much so it will still dirve fine,

and best bit ......mr plod wont look twice at ya

if ya go 4" u will def need to do sumthing about your castor, would def be a good idea to fit panhards. and u will have to either get longer brake lines or move the brackets down on the chassis..

so if moneys was an issue id go 2"
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I have 2 + 2 and run 35's with no problems. Cops don't even look twice at it ;)
Posts: 15
Joined: Sat Sep 13, 2008 8:46 pm
Location: North Brisbane

Post by Petrol60 »

balzackracing wrote:Seriously, if you are going to run 35's then get a 4" kit. 35's won't be legal so you may as well have the lift to fit them.
Talk to the guys at BBM, they just done a 4" tough dog kit for my SA 100 for 2750 with free delivery or free fitment. Being about 12hrs north of brisbane, I took the delivery.
What did that include ? I am guessing new arms and stuff at that price
Post Reply

Who is online

Users browsing this forum: No registered users and 93 guests