Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU 4.2 TD6 intercooled power ups
GU 4.2 TD6 intercooled power ups
Hi guys,
Can anyone who has one, or has a mate with one let me know what you / they have done to get a bit more go out of them..
I was thinking a 3 inch exhaust, some pump mods, bit more boost and dynoed should do it….is this about right? Anyone know what sorta gains I'd get from this?
Also, who should I use to get this done - who knows these things very well?
Thanks in advance.
Can anyone who has one, or has a mate with one let me know what you / they have done to get a bit more go out of them..
I was thinking a 3 inch exhaust, some pump mods, bit more boost and dynoed should do it….is this about right? Anyone know what sorta gains I'd get from this?
Also, who should I use to get this done - who knows these things very well?
Thanks in advance.
Rock hard pencil if it was mine but mine aint that much... or is it...turps wrote:That 162rwkilla wasps is that yours?
Cos thats bloody impressive. I aint expecting that much with a big BB turbo, huge intercooler and rebuilt/modded pump.
For more info people, call Andy at Diesel-Tec Lilydale.. not me
Stock GU pump, GQ is about 100rwkW.Mudzuki wrote:Stock pump is only good for 130rwkw from what i've been told.84mksd33t wrote:someone round here is claiming 225rwkw from a TD42 with stock pump, after market turbo and 20psi boost with top mount IC....
200rwkW takes 30 + psi boost, modded pump, intercooler of decent size, 3" exhaust.
Dyno figures are only as accurate as the quality of the dyno and it's operator, some are innacurate and some are dishonest.
If looking at dyno figures make sure the atmospheric compensations are within 4% of 1 and the dyno has an SAE, preferably a post 1990 one, to ensure is accuracy has been checked by an independent body.
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Who is online
Users browsing this forum: No registered users and 8 guests