hey guys i need to remove brake booster to get cam cover off motor. Is there any do's and dont's i have to watch out for? Do i need to bleed brakes once i put it back on?
Thanks bondy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
removing brake booster
Moderators: toaddog, Elmo, DUDELUX
IF you dont pull the steel lines off the master cylinder and kind of gently bend it away from the booster you can get away with it. depending on how much space you have to manuver the booster out as u generally need to move it atleast 2 inches foward before you can lift it out. if u have to completly remove the master cylinder you will need to bleed the master before bleeding the brakes.
Who is online
Users browsing this forum: No registered users and 0 guests