Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Is GME TX3220 still the way to go?

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Is GME TX3220 still the way to go?

Post by Moph »

Looking for a good reasonably priced UHF + bullbar mount antenna for my Sierra. Has to be a 1/4 DIN unit to fit the limited space!

Did a search and found the TX3220 was the OL favourite last year ... wondering if any new products have come out since that are any better?

Can get a TX3220 + 1.2m 4.5dB colinear bullbar antenna (incl cable and spring mount) for $440 at my local Electric Bug store. Or a 2.1m 6dB antenna for $25 more but that sounds a bit big for a Zook....

What should I be looking for in an antenna? It seems odd to me that they advertise a smaller, cheaper whip antenna (RFI 6db Ground Plane Independent mopole base) as their "most famous and powerful antenna" :? Got me all confused.

Any help appreciated - I know bugger all about UHF / antennas, and don't trust shop salespeeps...... Spend my dough for me :D
Posts: 61
Joined: Mon Apr 21, 2008 9:54 pm
Location: Melbourne

Post by Box Feroza »

I'm doing the same reaserch at the moment and found the TX3220 & 6db GI Antenna Pack for $275.00.

This unit is great.

This is the link to the website. Sorry can't help with antenna advice.

http://www.prestigecom.net.au/index.php ... cts_id=677

Good luck with it.
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

the 3220 has now been replaced by the 3420. The 3420 has buttons on the mic to change channel - a wank I originally thought but I have found it useful since upgrading. So useful in fact i think the 3440 would be even better with all the buttons on the mic.

Make sure your aerial is ground independent for ease of mounting.

the db gain has more to do with the type of terrain you drive in as a different gain aerial has a different signal pattern.

GME AE4018K1 Hi-gain 6db Heavy Duty UHF Antenna is very good compromise for bush/convoy use

A higher gain aerial will have a longer flatter signal but will not work with obstructions eg hills and trees

A lower gain aerial is suited to a very hilly area.

I have purchased stuff from contact communications in SA and found them EXTREMELY helpful

http://cgi.ebay.com.au/GME-TX3420-Remot ... m153.l1262
Warn - Dont leave home without it
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Hmmmmm bugger. Shouldn't have linked me to prestigecom.net.au and all their tempting deals :lol:

Was going to buy a cheap handheld from DSE for my spotter, but don't think I can go past the GME pack at prestigecom.net.au - TX3440 + TX680 for $425.

I love that the TX3440 can be put anywhere (under the seat / in the glove box) and all controlled remotely via the mic.

Looking at either an RFI CD900 6.5dB stainless whip antenna (920mm - also comes with a 400mm 3dB antenna) or a GME AE4018K1 4.5dB fibreglass whip antenna (920mm). Couldn't find a 6dB version of the AE4018K1 TRobbo. Either one better than the other for general highway / convoy use?
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

Moph wrote:Hmmmmm bugger. Shouldn't have linked me to prestigecom.net.au and all their tempting deals :lol:
Well you did ask me to spend your money for you :lol:
Moph wrote: I love that the TX3440 can be put anywhere (under the seat / in the glove box) and all controlled remotely via the mic.
It might get a bit wet under your seat. You will probably find that you have room to mount the main part of the unit behind the glove box. ie you will need to take the glove box out to mount it. This sounds like a PITA but it only take about 15 minutes in my disco. The other benefit of mounting it there is no one can see it and it is unlikely to get stolen.
Moph wrote: Looking at either an RFI CD900 6.5dB stainless whip antenna (920mm - also comes with a 400mm 3dB antenna) or a GME AE4018K1 4.5dB fibreglass whip antenna (920mm). Couldn't find a 6dB version of the AE4018K1I

Stainless antenna's tend to snap if driving continuously on corrugations and so I would reccomend fibreglass. A 6db gain antenna would be better than a 4.5db for most applications.

try this one on for size. It is spring mount, ground independent, and 6db. total height including the spring is approx 80 cm at a guess

http://cgi.ebay.com.au/New-GME-AE4018K1 ... dZViewItem
Warn - Dont leave home without it
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Yeah I intend to put it in the glove box. Will investigate putting it behind the glove box, but I'm not sure there is any room back there in a Sierra!

My point re the AE4018K1 is that according to GME's website, both the AE4018 (ground dependent) and AE4018K1 (ground independent) antennae are 4.5dB gain. I think that eBay ad is incorrect in stating 6dB.

Have read a number of good reviews (love slow Fridays! :armsup: ) on the RFI CD900 6.5dB + 3dB combo, and no reports of breakages. Think I'll give it a go - use the longer 6.5dB on the highway and the shorter 3dB off the beaten track when I'm not likely to be trying for long distance RX/TX anyway.

$530 ... ouch :?

Might slip this one through without the missus signing off ;) :D
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Post by crispy »

TRobbo wrote:the 3220 has now been replaced by the 3420. The 3420 has buttons on the mic to change channel - a wank I originally thought but I have found it useful since upgrading. So useful in fact i think the 3440 would be even better with all the buttons on the mic.
Not quite right there. The TX3220 hasnt been replaced it is still avaliable along with the TX3440 and TX3420

The AE4018K1 being 4.5dB is a pritty good allrounder, altho the CD900 is a very nice antenna, RFI is where its at for antennas. Shop around a bit should find it at a reasonable price

The price you had in your original post seems pritty good for the TX3220 and that antenna
The road to enlightenment requires Four Wheel Drive
Posts: 264
Joined: Sun Sep 23, 2007 1:05 pm
Location: SE Melbourne

Post by Pezooki »

Hey Moph.

Here is what I have done with the radios in my 91 Sierra:

Image

Image

Image

Image

The radios are Amateur (Ham), but you could still use this method for hiding the radio box behind the glove box. Works well! (I still managed to get my radios wet though - whoops! :lol: )

Cheers,

Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

I'm lucky enough to have air-con filling that space Pezooki ;) But there is space down there still for a UHF.

Off topic, did you relocate the bonnet release? Mine's in the glove box.
Posts: 264
Joined: Sun Sep 23, 2007 1:05 pm
Location: SE Melbourne

Post by Pezooki »

Oh - you lucky bugger! :cool:

Yes I relocated the bonnet release - the best idea EVER! It was such a PITA in the glove box - it was always hidden behind all the tools and spare parts in there! Every time I wanted to open the bonnet, all the tools ended up falling out on the floor!

Took no time at all to move it - it's all good! :D

Cheers,

Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Well, finally ordered. Now just gotta break the happy news to the wife :D

- GME TX3440 + TX680 value pack ($414)
- RFI Explorist 3 + 6.5dB antenna package ($105)

Should do the trick :) :armsup: :)
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Damn! That's service. Ordered yesterday at 9am ... arrived today at 10am (Perth --> Adelaide). :D

Bought through prestigecom.net.au.
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

4.5dB is best for hilly terrain and convoy stuff as its signal is less linear. Downside is less range.

6dB+ is best for open highway type stuff where its signal is linear and will reach much further. Downside is its crap in the bush.

Personally my prefered aerial is the thin flexible whip type. I have the thick fibreglass GME type on a spring base and have snapped the top 6" off it from hitting a tree branch at speed. My mate's got the first mentioned type and it's lastest the test of time much better than mine.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Yup whip aerial is the go. Very impressed with the quality of the RFI aerial. The combination of spring base and whip top gives it heeeeaps of flex if hit, and mounted to the top bar of my bullbar it only just protrudes above the Zook's roof anyway.
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

If you look around and want a "tunable" TX3 series get the 3200 or 3400 from a few years ago, you see them pop up now and then new

I say this cause you cant adjust any output with the newer items
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

I bought the 4.5db one listed above the other day, bloke reckons it is the best for bush/hilly application.
Best bit is once installed, the booster cannot be removed unless the wire is cut, and the whips for the top are only cheap.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests