Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lowering spare tyre

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 16
Joined: Sun Apr 20, 2008 4:38 pm
Location: Cessnock

Lowering spare tyre

Post by stagma »

Hey guys,

I've noticed most other feroza's on the roads around here there spare located in a lower position. so i decided to have a look at mine there are holes for the lower position but no nuts behind the holes. is there something i missed as it doesn't seem to have reinforcement behind the holes

Cheers, Chris
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

No - its not just you, my door is exactly the same..... there's no support behind the second set ( the lower set ) of holes so they can't be used.

With a standard tire it must be a joke..... I have a 34 swamper on and its still way to high. Looking at getting a later door.

If not will rotate the bracket / cut and modify as rear vision is a bitch.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

Post by r0ck_m0nkey »

What you may be noticing is the different year model doors.

The earlier models had it up higher and in the centre of the door. The later models had it slightly lower and offset to the drivers side which may be the one you're noticing.

With the later models, the position was also deemed to restrict vision of the tail lights, hence why they have a bigger rear bumper and the lights mounted down low, which technically you would probably have to do to yours if it is the earlier model, although no one would probably ever pick up on it.
If God did not intend for us to eat animals, then why did he make them out of meat?
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

No argument about the years... but mine has TWO complete sets of holes in the outer door skin - so obviously at some point in time there were two variants.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 16
Joined: Sun Apr 20, 2008 4:38 pm
Location: Cessnock

Post by stagma »

Thanks for the replies guys, i thought it wasn't just me but it had to be confirmed
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests