Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

child saftey?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

child saftey?

Post by matthewK »

just wondering how you guys have done the baby/child seat into the 60 seires cruiser?
iv got an 83 60 with an 87+ body with twin headligths

iv been told to maybe to drill a hole throught the floor plate either side and bolt it up?????????????

whats do your think?
1995 land rover disco on 265 muddies
Top
Posts: 304
Joined: Wed Oct 30, 2002 11:14 pm
Location: Brisbane

Contact:
Contact mlowe76

Post by mlowe76 »

I dont have a 60 I have a 73 midi.

Mines a bar across the back from side to side with the restraint clips on it.


I'll try to find a pic for you

Cheers
Matt
Top
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Post by 98lux »

When my cab was cut, the engineer told us to put some restraint clips from a benz in it held in with riverts :shock:
if ya gona rev it, Chev it
Top
Posts: 242
Joined: Wed Mar 19, 2008 10:56 pm
Location: Brisbane

Post by stockhorse »

matthewK, the problem you have is that the seats are not designed for restraints to go to the floor,the backs of the seats are not strong enough and will collapse under strain. You have to fit a CRAB (child restraint anchor bar).

That being said the later model seats actually have an anchor point halfway down the back of the seats, so you may be able to check if this is the case in your vehicle.

If not do NOT drill through the floor as you will be putting your kids at risk.
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

stockhorse wrote:matthewK, the problem you have is that the seats are not designed for restraints to go to the floor,the backs of the seats are not strong enough and will collapse under strain. You have to fit a CRAB (child restraint anchor bar).

That being said the later model seats actually have an anchor point halfway down the back of the seats, so you may be able to check if this is the case in your vehicle.

If not do NOT drill through the floor as you will be putting your kids at risk.
only reason i thought throught the floor was when the old man got his it had a bolt throught the floor,

but in saying this i do have the 61/62 series body i have check and found 2 bolt holes on the back of the seat itself 100-200 from the top, with one side actually having a bolt in it :P so i think u have answered my question,


ps: i didnt really want to Cookie my cargo barrie looks too pritty
1995 land rover disco on 265 muddies
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

hey fatty matty :P you do it the same way you did it in your GQ
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

Nat84 wrote:hey fatty matty :P you do it the same way you did it in your GQ
thats enought out of you noobie, you swap out your 4by for a crumpledoor
nah i have located the actuall child restrain holes on the back of the actual seat 2 ofthem and i shall use them :P
1995 land rover disco on 265 muddies
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 74 guests