Show us your snorkel thread...

[jonno_racing]

well we have one for everything elce...

i have nearly finished mine close 2 it

2.5inch stainless tube with mandrel bends... semi polished as i didnt want it to be blairy

i decided not to run flat with the guard.. think it looks better like this..





Cuzz

[PJ.zook]

Heres mine, made from 3" stainless and truck intake bends

[get it up there]

[DavePatrol]

Heres mine, made from 3" stainless and truck intake bends

hay PJ.zook what degree are the bends you used i no the one coming out of the bonnet is 90 but what are the other to


not mine but like it, ill probably do one smiler to this



cheers Scott

[PJ.zook]

The other two are 45deg bends mate. To get it into the original airbox i just took the 3" 90deg bend and the small rubber bend on airbox into bunnings and found some pvc that fit beautifully. There is a stepped reducer that fits the 3", then for the airbox rubber bend i think a female to female 2" (i think) adapter.

[jonno_racing]

airbox is 2.5inch.. that's why i did my whole thing from 2.5...
and it was free

[lump_a_charcoal]

I used a 60 degree bend going up the windscreen, and then a 30 at the top so the ram head sits level.

I used 3 inch exhaust pipe, and then got a silicone 3 inch to 60mm adapter bend to go onto the airbox - just gotta weld on some tabs, rivnut it to the windscreen and it is almost done...

[PJ.zook]

I used a 60 degree bend going up the windscreen, and then a 30 at the top so the ram head sits level.

I used 3 inch exhaust pipe, and then got a silicone 3 inch to 60mm adapter bend to go onto the airbox - just gotta weld on some tabs, rivnut it to the windscreen and it is almost done...

Gotta love the rivnuts, fantastic little bastards

[BOGFROG]

Here's Mine 3" Stainless Powdercoated Mounted with taped plates welded to inner-side bolted thru Guard and Rivnuts on Pillar. Cost Me $20 to make!



Here's the build up of my snorkel!
http://www.outerlimits4x4.com/ftopic148561-0-0-asc-.php

[lump_a_charcoal]

Is a metallic finish possible with powdercoating? i wanted to match my front bar which is a gunmetal grey, but didn't hink you could do it with powdercoat...

[Adsport]

[dxkrazed]

Heres mine, made from 3" stainless and truck intake bends

What tires are you running there? They look pretty crazy

[PJ.zook]

Just standard 31" Simex. They work great.

[Gwagensteve]

With the right hand rear back to front

Good looking car PJ.

Steve.

[ScrawnC]

Good looking car PJ.

Is it the well used body or the big tyres that do it for you Steve?

I'll post pics of mine when I get home and have access to photobucket again. 3" exhaust from front of guard with one 90 degree silicone bend into airbox.

[Gwagensteve]

The "satin" paint, the stance... and the well used body.

Steve.

[jonno_racing]

hey BOGFROG did you use mild wire when welding yours?? i noticed it rusted.. hence the powder coating?

or did you use grinding gear that had been used with mild?

[jonno_racing]

Finaly finished mine... all bar 2 more bolts and a snorkel head....








So stoked... took me a few hours to get the right finish on the stainless that i wanted... not to shiny

[PJ.zook]

With the right hand rear back to front

Good looking car PJ.

Steve.

lol yeh good ol Beaurepairs didnt know one way tyres existed

[BOGFROG]

hey BOGFROG did you use mild wire when welding yours?? i noticed it rusted.. hence the powder coating?

or did you use grinding gear that had been used with mild?

Hey Jonno-racing! Yeah, cause it wasn't all stainless ( The 90 deg bend into the guard is mild steel) we just used mild wire to weld it all up but I was going to powdercoat it anyway, polished is just to blingy for me.I think it suits my jigger better being color matched anyway! Thx Robb.

[jonno_racing]

hey BOGFROG did you use mild wire when welding yours?? i noticed it rusted.. hence the powder coating?

or did you use grinding gear that had been used with mild?

Hey Jonno-racing! Yeah, cause it wasn't all stainless ( The 90 deg bend into the guard is mild steel) we just used mild wire to weld it all up but I was going to powdercoat it anyway, polished is just to blingy for me.I think it suits my jigger better being color matched anyway! Thx Robb.

ah i see...
should have gone like mine.. the brushed look...



although i think it still may be a bit 2 shiny

[DavePatrol]

hay jonno_racing did you weld the manral bends in or was that one staight bit of s steal which you got manral bent?
ternd out realy good mate hope mine is as good when i do one

cheers scott.

[v840]

Look closer, you can see the weld lines.

[Gwagensteve]

Not a conventional snorkel, but plenty for everything except winch challenge or something.

Precleaners bring the cool.



Steve.

[Kitika]

How does the bonnet open past the precleaner on that one steve? Just a big hole under where the precleaner sits?

[Gwagensteve]

It doesn't - you have to remove the precleaner - no biggie.

Steve.

[grimbo]

here's the snorkel on my old Zuk that gwagensteve made and jtraf has cleaned up and made all purdy. Actually he's made the whole thing real purdy

[GRPABT1]

3inch flexible hose with snorkel top, modified GTi air box and silcone bend to the throttle body.




Cheap, affective and bounces back after a lie down

[shandy]

Hey all

how about some Vitara's on here, there must be a few

mitch

[Jaffa]

Heres mine - it was made by/for sierrjim



[/quote]