Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nissan ZD30

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 3
Joined: Tue Aug 07, 2007 12:34 pm
Location: Panama City, Panama

Nissan ZD30

Post by Lagarto »

Hello.

I need information about the torque specs for this engine, Nissan ZD30, TDI, wich I need this to repair this engine.

Any advice is appreciated.


Cheers!
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

Image

You might have to wait until tonight (AEST) for a reply - there are 3-4 Nissan dealership workers on here though that can help.

Can i ask what happened to the motor??
Posts: 3
Joined: Tue Aug 07, 2007 12:34 pm
Location: Panama City, Panama

Post by Lagarto »

The stuff is that the engine suffered lack of lubrication on the cylinders.

The piston rings came out from the block welded to the pistons, all 4 pistons and respective rings.

Connecting rod and main bearings are ok, crankshaft is standard.

The camshafts are ok too, just the usual stuff with cylinder head, valve replacements, valve seats, valve guides, valvle oil seals, the usual.

Cylinder head surface is good, a fine flat surface. The problem were with the pistons and rings.

This is a Patrol engine, the vehicle is a 2004 Patrol.

Thanks for the tip.


Cheers!
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

I dont know if its your car or a customers/friends, but once you've rebuilt it, if you have a GOOD search here on OL, there's a list floating around with some really good preventative maintenence/modifications for the ZD30 motor, as they can be a bit fragile.

Good luck anyways!
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

!Hola!

Is this the VVT engine? They have issues with high EGTs (exhaust gas temperature) melting the top end.

There is a thread in the tech section of www.aulro.com/afvb on them as well. A guy there installed a pre-turbo EGT on one, and the temps went to high 600's (oC) with almost no load.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 3
Joined: Tue Aug 07, 2007 12:34 pm
Location: Panama City, Panama

Post by Lagarto »

Thanks for the advices.

For me, the best engines for Patrol are the SD33 and TD42.

I rather have a TD42 than ZD30.

This engine is not mine, is from a relative, I'm just fixing it.

I'll be checking the site for what I'm looking for.


Cheers!
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

personally i have one with nearly 200 000k's never had a drama.. got a mate who's put nearly 400 000 on one and its gettin pretty tired..

both have been serviced every 10000k's

hope this helps
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Tomo_89 wrote:personally i have one with nearly 200 000k's never had a drama.. got a mate who's put nearly 400 000 on one and its gettin pretty tired..

both have been serviced every 10000k's

hope this helps
Me too!!

We've owned the 'family bus' GU since new (May 2001), its got 170k on it and has never missed a beat, but it has been maintained as per schedule (10 000km intervals) with semi syn oil. But I must admit, I am thinking to changing it to 5000km intervals, with a good oil flush every time.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest