Hey, just wondering what I can do to get my GU goin a bit better, nothing extreme cause its the mrs shopping trolley ...
thanks, Tim
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What can I do to get my 3ltr GU crackin?
Shouldn't need to do anything to get it cracking...... The pistons will probably crack themselves before too long 
GU ST 4.2 TURBO. 9000lb Warn, Snorkel, 4" Lift, 33" BFG Muddys, ARB Locker, Outback Drawers, Dual Batteries, ARB Roof Rack, IPF HID's, GME UHF, 60lt Engel, Full 3" Exhaust and fuel pump tweaked
GU
Well until the pistons do crack she'll be crackin!! 
What about bigger turbo and water to air intercooler? any good on a 3ltr?
Whats the Dawes valve do and where does it go?
What about bigger turbo and water to air intercooler? any good on a 3ltr?
Whats the Dawes valve do and where does it go?
GQ, 33 wranglers, 3inch suspension, lightforce 240s ,2008 VESS Commodore, 20's, Manual, sunroof, On road weekend car! Fully sick maaate, GU 3ltr, snorkel n stuff, touring vehicle
You don't need a bigger turbo cause the factory one can already put out more boost than the engine can handle.
The Dawes valve is a boost pressure controller for variable vane turbos.
http://users.bigpond.net.au/conody/Manu ... roller.htm
It will allow you to bypass the ECU controlled boost controller and have full manual control. It will stop the over boosting issues that cause the 3l to blow.
Adjusted correctly, it will give you a flat tourk curve and boost from 1000rpm.
Another cheap mod is to fit a fan to the intercooler as the factory scoop is useless below 80kph.
Much thanks to patrol4x4 for the link.
The Dawes valve is a boost pressure controller for variable vane turbos.
http://users.bigpond.net.au/conody/Manu ... roller.htm
It will allow you to bypass the ECU controlled boost controller and have full manual control. It will stop the over boosting issues that cause the 3l to blow.
Adjusted correctly, it will give you a flat tourk curve and boost from 1000rpm.
Another cheap mod is to fit a fan to the intercooler as the factory scoop is useless below 80kph.
Much thanks to patrol4x4 for the link.
GU Patrol with go better bits added
You have to laugh at it or you will be sh1ting bricks. lol.
Never the less. Doing the mods that Chaz and the guys are doing to reduce the likelihood of the 3l blowing.
If mine does, then its actually a good thing cause the missus will then allow me to put in something that's got balls.
For the time being I will have to live with what ive got.
p.s. I was following a 200 series diesel on friday heading down the coast on Friday. Smoking heaps at 110kph.
Never the less. Doing the mods that Chaz and the guys are doing to reduce the likelihood of the 3l blowing.
If mine does, then its actually a good thing cause the missus will then allow me to put in something that's got balls.
For the time being I will have to live with what ive got.
p.s. I was following a 200 series diesel on friday heading down the coast on Friday. Smoking heaps at 110kph.
GU Patrol with go better bits added
Thats exactly right, if if does go bang itll be conversion time! and yeah ill be doing the conversions Chaz talks about cause he reckons there getting good results... thats good about the turbo, something i guess..Skegbudley wrote:You have to laugh at it or you will be sh1ting bricks. lol.
Never the less. Doing the mods that Chaz and the guys are doing to reduce the likelihood of the 3l blowing.
If mine does, then its actually a good thing cause the missus will then allow me to put in something that's got balls.
For the time being I will have to live with what ive got.
p.s. I was following a 200 series diesel on friday heading down the coast on Friday. Smoking heaps at 110kph.
Has anyone used the Water to air intercoolers? a bloke at work put one on his 4.2 and reckons he got good results..
And the Ditronic chips? who's running what and where do you get them from?
I think its funny that "bogged" never has any constructive advice... never once have I seen him actually 'help' someone...
Bogged has helped more people than you've had post numbers newbie.Spaceballs wrote: I think its funny that "bogged" never has any constructive advice... never once have I seen him actually 'help' someone...
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
A 2 3/4" exhaust system, a chip that is adjustable dp or steinbauer, block of egr, fit a dawes, thats about it. Fitting a w/a will take some work. If you are prepared to pay for that then its the best.
Andy
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
I am looking for somewhere in Brisbane that can tweak up my 2002 3lt GU wagon, also looking at fitting an Intercooler fan and dawes valve. Anyone know of such a place that can do it all.
2002 GU 3lt wagon 5" lift, reduction gears, 35" MTZ...
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
Not a newbie champ, my old Nickname ive been on here since 2002 just like you... and im sure other people would aggree he has more negative stuff to say than positives... I was just making the statement that if you dont have anything nice to say dont say it at all... but anyway this isnt the topic of the thread...awill4x4 wrote:Bogged has helped more people than you've had post numbers newbie.Spaceballs wrote: I think its funny that "bogged" never has any constructive advice... never once have I seen him actually 'help' someone...
Who is online
Users browsing this forum: No registered users and 105 guests