Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

New GU ute at work

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 38
Joined: Sun Nov 04, 2007 8:02 pm
Location: central qld

New GU ute at work

Post by nibbsy »

We just got a new GU leaf ute at work (i work at a mine in central qld) and compared to the 75 series cruisers we got its so rough, seems to use the chassis instead of the suspension to soak up the bumps and sends it through the whole vehicle.
just wondering if nissan have cured the hand grenading of the ZD30 by now cos i want to know a way to blow it up, that way they will give us a v8 cruiser if we keep destroying the pooeys.
nibbsy
Put some spark in your life.........Sleep with an electrician
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: New GU ute at work

Post by bogged »

nibbsy wrote:... cos i want to know a way to blow it up,
put key in, turn it and drive it..
or start it, just put a brick on throttle, and walk away.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

Just leave it parked up against a dump truck tyre like a wheel chock ;)
Posts: 249
Joined: Tue Jan 01, 2008 8:53 pm
Location: gulf country

Post by rogantriton »

remove sump plug, drain all oil, go for a drive
'08 BT-50: ARB winch bar and rails, Safari snorkel, Hella rally 4000 spotties, GME uhf, Dual battery, Long range fuel tank
Posts: 41
Joined: Wed Oct 31, 2007 10:30 pm
Location: Townsville

Post by jaybags »

Just make sure that if you do get a new v8 cruiser after the Nissan blows up, carry lots of spare oil and a spare motor cause you will need it.
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

jaybags wrote:Just make sure that if you do get a new v8 cruiser after the Nissan blows up, carry lots of spare oil and a spare motor cause you will need it.
and input shafts :finger:
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

Good luck on getting the cruiser. I'd say the reason you don't have them at the moment is that they don't have airbags. Most light vehicles these days are required to have them to be used on mine sites.
-Scott- wrote:Isn't it a bit early in the day to be pissed? :finger:
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

And transfer cases, there toast at 10,000
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

diffs too
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 38
Joined: Sun Nov 04, 2007 8:02 pm
Location: central qld

Post by nibbsy »

found out one reason why it may be a bit stiff, the tyres may have had about 15 PSI too much from the dealer :roll:
its a bit better now but the seats are so shit compared to the cruiser and its still rougher.
It shouldnt take long to blow up, its got 800km on it and we have had it four days!! :)
nibbsy
Put some spark in your life.........Sleep with an electrician
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

haha you're one of the few people in the world who thinks the cruiser ute seats are more comfortable than the patrol's!

i mean they're both pretty shit, but i found the patrols to be just that bit nicer. not by much but my back/arse preferred them.

how to blow up a grenade?

Hmmmm..you need a dose of bad fuel. even then the common rail injectors will probably shit themselves before the motor does (bit unlike the old version)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

stuee wrote:Good luck on getting the cruiser. I'd say the reason you don't have them at the moment is that they don't have airbags. Most light vehicles these days are required to have them to be used on mine sites.
:lol: :lol: :lol:
I dont think he is listening or wants to hear that...
They will just fix the grenade and give it back to him
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

Would be funny if your boss seen this thread :finger:
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

airbags next coming next update :armsup:
so you have a few months to blow it up still and not before
1uzed and no home for it
Posts: 38
Joined: Sun Nov 04, 2007 8:02 pm
Location: central qld

Post by nibbsy »

there are other new cruisers on site so the airbag issue isnt the problem, it may be that they destroyed a heap of parts in the first few weeks when they OCE got a new one!
Oh well, im happy just to thrash what ever they give me, i do enjoy driving the bosses new hilux, those things get sideways and just keep it out there!
good fun.
nibbsy
Put some spark in your life.........Sleep with an electrician
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Put a Jeep badge on it, it should spontaneously combust in a few hours or so...
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Post by Red04VXE »

What about the Pootrol Coil Rears bending Chassis Rails?
Has there been a thread on that?
S.E.Qld Locals Crew.....
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

i took one of the new V8 D4D 79s for a blat up the freeway today- with a Fire fighting slip on unit on the back and 7.50R16's on it, and the damn thing held fith, with the aircon on, weighing 3.6 tonnes the whole way up from Portrush road to Crafers, AT 100!!

They have some berries, thats for sure!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

ferrit wrote:i took one of the new V8 D4D 79s for a blat up the freeway today- with a Fire fighting slip on unit on the back and 7.50R16's on it, and the damn thing held fith, with the aircon on, weighing 3.6 tonnes the whole way up from Portrush road to Crafers, AT 100!!

They have some berries, thats for sure!

wonder how long 5th gear\gearbox bearings will last.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

love_mud wrote:
ferrit wrote:i took one of the new V8 D4D 79s for a blat up the freeway today- with a Fire fighting slip on unit on the back and 7.50R16's on it, and the damn thing held fith, with the aircon on, weighing 3.6 tonnes the whole way up from Portrush road to Crafers, AT 100!!

They have some berries, thats for sure!

wonder how long 5th gear\gearbox bearings will last.

20,000K ??
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

we have the v8 criusers at my mine site and they are awsome fun, heaps better than the muppet armed pootrol
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 41
Joined: Wed Oct 31, 2007 10:30 pm
Location: Townsville

Post by jaybags »

Red04VXE wrote:What about the Pootrol Coil Rears bending Chassis Rails?
Has there been a thread on that?
Hahahaha well a bit of bracing can fix this. Bit easier than rebuilding a motor hey. And isnt it funny that Toyota dont even have a full coil option on the utes. Awesome them new v8 dsl's lol. Property owners love them hehehehe.
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

nibbsy wrote:found out one reason why it may be a bit stiff, the tyres may have had about 15 PSI too much from the dealer :roll:
its a bit better now but the seats are so shit compared to the cruiser and its still rougher.
It shouldnt take long to blow up, its got 800km on it and we have had it four days!! :)
nibbsy
That must be one large mine site to cover that distance??
JB
Posts: 31
Joined: Tue May 13, 2008 1:35 am
Location: Towsnville

Post by Mattoz »

is this particular mine just north of the coal capital by any chance?
Posts: 64
Joined: Sat Aug 25, 2007 8:54 pm
Location: Blackwater, QLD

Post by ShaneGQ »

OCE got a new one!
Oh well, im happy just to thrash what ever they give me, i do enjoy driving the bosses new hilux, those things get sideways and just keep it out there!
I work out at a paticular mine that have all of these vehicles. With attitudes of wanting to blow the vehicles up and being a supervisor with a hi lux dual cab i will keep an eye out, thanks...
2002 GU 3lt wagon 5" lift, reduction gears, 35" MTZ...
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
Posts: 38
Joined: Sun Nov 04, 2007 8:02 pm
Location: central qld

Post by nibbsy »

its all fun and games.
the vehicles never stop, they are always in use 24/7
when someone finishes their shift someone else jumps in and starts theirs, thats why there are a heap of km on em.
be intersting to see how they go compared with the cruisers, wait and see i guess.
They are definatley not as comfy on ride and seats though.....
nibbsy
Put some spark in your life.........Sleep with an electrician
Posts: 64
Joined: Sat Aug 25, 2007 8:54 pm
Location: Blackwater, QLD

Post by ShaneGQ »

All good just Sh*tin ya. The only 4x4's that seem to last are the new cruisers. Everything else seems to fall apart.
2002 GU 3lt wagon 5" lift, reduction gears, 35" MTZ...
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: New GU ute at work

Post by Guy »

nibbsy wrote:We just got a new GU leaf ute at work (i work at a mine in central qld) and compared to the 75 series cruisers we got its so rough, seems to use the chassis instead of the suspension to soak up the bumps and sends it through the whole vehicle.
just wondering if nissan have cured the hand grenading of the ZD30 by now cos i want to know a way to blow it up, that way they will give us a v8 cruiser if we keep destroying the pooeys.
nibbsy
Sook .. :!:
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Post Reply

Who is online

Users browsing this forum: No registered users and 154 guests