Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Toyota 3y ENGINE SPECIFICATIONS

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 51
Joined: Sat May 01, 2004 5:47 pm
Location: GREECE / RHODES ISLAND

Contact:
Contact Donald2

Toyota 3y ENGINE SPECIFICATIONS

Post by Donald2 »

Hi there i woyld like to have some information about Toyota engine 3Y

Thank you
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

They're rubbish.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 117
Joined: Thu Mar 23, 2006 4:48 pm
Location: Redbank Plains

3Y

Post by error »

Have one in my rig..
No power house but ok..
good on fuel and very relible..
as a side note my understanding it that most toyota forklifts use the 4Y (same motor, longer stroke, bigger bore) so they must be ok..
also means parts will be around for a while & cheap...
Just want to play...........
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

It's a toyota, so it's generally going to be reliable, but you'd never choose to run a 3Y.

the 22R on the other hand is a ripper!

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
pom
Posts: 285
Joined: Tue Mar 25, 2008 7:05 pm
Location: maitland, nsw

Post by pom »

wouldnt run it was a prick of a thing and real tempromental :cry:
SCUM LUX 09!
Any fab work of any form including tig give me a yell! 0431718878.
Top
Posts: 51
Joined: Sat May 01, 2004 5:47 pm
Location: GREECE / RHODES ISLAND

Contact:
Contact Donald2

Post by Donald2 »

I would like to have more tihngs to know about it i want to fit it on a Samurai . . . what is better 3Y or 4Y

i would like to have possitives and nagetive suggestions about this engines pls
Top
Posts: 51
Joined: Sat May 01, 2004 5:47 pm
Location: GREECE / RHODES ISLAND

Contact:
Contact Donald2

Post by Donald2 »

Gwagensteve wrote:It's a toyota, so it's generally going to be reliable, but you'd never choose to run a 3Y.

the 22R on the other hand is a ripper!

Steve.

The 22R i know its better but difficult to find over here . . .
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 97 guests