Hi all !
I have a Feroza "90 F-300 carby ....
I was just wondering if you guys knew the best way to do this....
Or if someone already has done it, then I would like to know what
I have to keep in mind.
Also, what do I need and what do I have to change...
Thanx !
Oddur
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Carb to EFI conversion
Moderator: Tiny
Its not a small job.. I would recomend that before we start discussing individual bits you download the F300 manuals form www.warfs.org
This covers both systems and you will be able to see exactly the range of changes required.
This covers both systems and you will be able to see exactly the range of changes required.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Thank you, I will look into it and see what I need...MightyMouse wrote:Its not a small job.. I would recomend that before we start discussing individual bits you download the F300 manuals form www.warfs.org
This covers both systems and you will be able to see exactly the range of changes required.
But Im planning on buying a spare car witch is a Feroza F300 EFI "92
I would take all the parts needed from that car...
I just don´t know where to start....
Best regards
Oddur
Great idea hahaNewtothefourbeworld wrote:is there any reason you just keep that car and swap bits from your carbie to that one?
I have thought about that too but the other car is dented alot and in very bad shape except for the engine..... And my first feroza has so much sole that I don´t think I could ever do that to her .
It´s hard do decide, I´ll think about it, maybe that is a nice project this winter haha
Thanks guys
Ok - now we have a better grasp of your scheme - I'd say its reasonably simple to do - especially with a manual and a donor car.
Having the bits will make all the difference.
Things to check...
The oxgen sensor isn't stuffed, they have a 150,000 km approx lifespan max.
The TPS isn't stuffed - lots of posts on this problem already......
Fit a new fuel filter whilst your at it.
Having the bits will make all the difference.
Things to check...
The oxgen sensor isn't stuffed, they have a 150,000 km approx lifespan max.
The TPS isn't stuffed - lots of posts on this problem already......
Fit a new fuel filter whilst your at it.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 0 guests