Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Securing trailers from theft !

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 850
Joined: Tue Jun 28, 2005 1:44 pm
Location: Sydney Southern Suburbs

Securing trailers from theft !

Post by Swerve »

OK as I got a $hit hot boat I'm worried about it getting stolen.

Even more so heading to Logan QLD at Christmas to see the inlaws and even more worried.

So what is the best way to secure trailers whilst hitched on the tow and parked stationary ?

As I have a hayman reese hitch I have weak spots straight away as they can
1- Unhitch the trailer
2- Undo the ball if I lock the release lever
3- Pull the receiver pin and take my whole hitch

Whilst hitched I'm thinking of running some additionial BIG chain which is padlocked onto the tow bar (in such a way they cannot undo anything) and then padlocked onto the trailer. This will atleast mean they need to take the complete car and boat or cut the chain/ padlock.

Hmm insurance claim would be nice, but don't want it affected

Now whilst parked in the front yard ?
Bodgy trailer hitch lock ? wheel lock ? padlock again to a fixed object ?

What do you reckon ?

Steve

PS- I remember seeing some steel chain which was almost impossible to use Bolt cutters on ?

Image

Image
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

mmmmmmmmmmmmm

I shall keep an eye out for ya! :D
JB
Posts: 534
Joined: Mon Jul 24, 2006 9:38 pm
Location: On The Beach

Post by turkey »

I used to do what u said of thinking of doing. I had some hell heavy duty chrome moly chain that i used to run through the drawbar of the trailer and then loop around through the towbar itself secured with a real big heavy duty lockwood padlock. Worked for me anyway :armsup:
"The Bushpig"
Posts: 850
Joined: Tue Jun 28, 2005 1:44 pm
Location: Sydney Southern Suburbs

Post by Swerve »

turkey wrote:I used to do what u said of thinking of doing. I had some hell heavy duty chrome moly chain that i used to run through the drawbar of the trailer and then loop around through the towbar itself secured with a real big heavy duty lockwood padlock. Worked for me anyway :armsup:
Where do you buy the GOOD chain, my local fastener shop, don't do chain, Bunnng is crap ?
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

Swerve wrote:
turkey wrote:I used to do what u said of thinking of doing. I had some hell heavy duty chrome moly chain that i used to run through the drawbar of the trailer and then loop around through the towbar itself secured with a real big heavy duty lockwood padlock. Worked for me anyway :armsup:
Where do you buy the GOOD chain, my local fastener shop, don't do chain, Bunnng is crap ?
If your after real chain look to the UK and get some motorbike chain, there's a bike chain/lock the chain is 2kgs in weight and the lock is 1.5kgs in weight.

A link is 1.5inches thick with steel lined plastic cover it's 1/1.5metre long.

Still doesn't stop bikes being stolen in UK but it makes it real hard.

You can get that chain here, cost a bit though.

lol in the bike mag they said if you want to pop wheelies easy just have that chain/lock on the back.
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

nah

Post by stormpatrol »

Forget the chain idea go the cable MASTER LOCK make a big range of cable locks , very hard to chop takes a deal of time as for chain one or two chops and your are away , also were ya hayman reese pin goes through the hitch you can also padlock this pin , instead of the [R ] clip , also padlock the safety chains to ya car , how far do you go trailer wheel locks etc , it can be endless :D
THE SMOKER YOU DRINK THE DANCER YOU GET
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Remember, any theft deterrant is only that, a deterrant. It wont stop a commited thief. You can only slow him down.

Does your coupling have a hole through body and handle? A lock can be placed through both so coupling is locked onto towball. The same can be done for the HR pin. You could also crossdrill the towball nut and shaft, and pin this.
Mud makes excellent toothpaste.
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Have a look here at these products.
http://www.couplemate.com.au/index1.html?c35.html&1
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Dont know wat kind of trailer brakes you have but i do know people that adjust the brakes on the trailer so there locked. Depending on your brakes only takes a couple of seconds but like the others said it wont stop them just slow them down.
Wtb, 105 series rear tyre carrier, alloys and tyres.
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

the chain your thinking of is made from cast iron.

at the end of the day theyll just flog your car as well
Posts: 534
Joined: Mon Jul 24, 2006 9:38 pm
Location: On The Beach

Post by turkey »

Swerve wrote:
turkey wrote:I used to do what u said of thinking of doing. I had some hell heavy duty chrome moly chain that i used to run through the drawbar of the trailer and then loop around through the towbar itself secured with a real big heavy duty lockwood padlock. Worked for me anyway :armsup:
Where do you buy the GOOD chain, my local fastener shop, don't do chain, Bunnng is crap ?
Not sure if ya have Nobles over there, thats where I got it I think was a long time ago. And it would take a fair set of bolt cutters and some pretty fuggan hefty biceps to cut this shit
"The Bushpig"
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: nah

Post by bogged »

stormpatrol wrote:Forget the chain idea go the cable MASTER LOCK make a big range of cable locks , very hard to chop takes a deal of time as for chain one or two chops and your are away
I agree with tis.
If your really keen, change the hitch to a Treg type...
Not many thieves will have one of those on the stolen commodore they will tow your boat away with.
Posts: 310
Joined: Fri Jan 12, 2007 1:22 pm
Location: brisbane

Post by azwa »

insure it ;) because if thievin scum want it then it doesn't matter what you do :!: dont flaunt it or leave it on the street for easy pickins & you should be right ;) the scum would rather take ya gps as they can go swap that for a whack up the arm :D
"instant combustion"
"ITS A JEEP THING"
Posts: 7
Joined: Mon Oct 06, 2008 8:40 pm
Location: oakey Qld

Post by rigger329 »

Hi

had 24ft on dual axle tralier. i used to put a length of good chain through the rims on same side and lock with big lock ( sometimes i did both sides )
never had any problems it takes them too long and too much noise getting it off.

cheers ed
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

I know people who have set bloody big chains into the concrete slab then pad locked it on.

also you can get one of those trailer locks that go around the hitch
[color=green]Vote Earth[/color]
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

Take all the wheels of the trailer.
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

There is a trailer coupling lock called Talon, when on the car, you can lock the trailer on, when off you can lock the safety chains inside the clamp which disables the hitch and the ability to drag the trailer away using the chains.

Beyond that buy a wheel clamp as well, they're not too dear.

Chain is a waste of time, when you buy the stuff they cut it to length using bolt cutters :idea:
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I drilled the pin on the hitch out a little bit and used a padlock on it, only downfall was when the lock filled with crap, it made it hard to unlock and remove the hitch.
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

pad locks are weak as. 95% of them can be undone without any tools.

I think a good insurance policy is the best anti theft.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

SIM79 wrote:Take all the wheels of the trailer.
sierrajim wrote:
Beyond that buy a wheel clamp as well, they're not too dear.
I think you have your best 2 options there... and of course insure it anyway cos you never know what might happen on or off the water
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

If you want some chain that you won't cut with bolt cutters. Check out Serafini Chains. We tested some at work once and my boltcutters that used to cut 24mm y-bar wouldn't cut it. No match for my 9" grinder. :twisted:

http://www.serafinichains.com/
GU Patrol with go better bits added
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

Post by michael a »

I Would stop puttings ads all over the net that you have it.
get under it
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Re: nah

Post by zagan »

stormpatrol wrote:Forget the chain idea go the cable MASTER LOCK make a big range of cable locks , very hard to chop takes a deal of time as for chain one or two chops and your are away , also were ya hayman reese pin goes through the hitch you can also padlock this pin , instead of the [R ] clip , also padlock the safety chains to ya car , how far do you go trailer wheel locks etc , it can be endless :D
Do you mean this crap?

http://www.masterlock.com/cgi-bin/class ... earch.y=14

Get ya self a cold chesil and a hammer and spend an half hour to hour and you'll be through it.

Have a mate who had his dirt bikes with this cable lock crap and the 2 kid out the back were using a wood chesil and a hammer and was about half way through they got busted by the guy next door who rang up my mate who chased the kids away he showed me the cable lol onbly 2-3 strands left before it was cut through.

And these 2 videos show you how to open a locked master lock.

http://au.youtube.com/watch?v=WbVZER_WhPc

http://au.youtube.com/watch?v=zHXgOxSGznE


This is the bike chain I'm talking about something decent.

http://www.webbikeworld.com/r2/motorcyc ... ock-chain/


ANother the beast Chain.

http://www.webbikeworld.com/r2/motorcycle-lock/

The whole reason why I say look to the UK and bikes is that bikes get flogged like kids grabbing lollies in a shop.

So companies over there go above over board in terms of chains and locks.
Posts: 362
Joined: Sun Jun 15, 2003 9:50 am
Location: Melbourne

Post by amtravic1 »

I use a Talon Lock to secure my work trailer. There is no way that is coming off without an angle grinder. Secures the coupling to the car or off the car. They are much cheaper now than when I bought one.
http://www.bilock.net/talon.pdf

Ian
Posts: 15
Joined: Wed May 28, 2008 6:40 pm
Location: Vic

Post by Eddy351 »

Everyone is focusing on the mechanical sides of security but dont forget to let your neighbours know you will be away and to keep an eye out.


If you will be keeping your boat in the same position most of the time dig a hold underneath the rear axle and fill with cement or if you already have concrete just get a plate bolted into that. Then just wrap a chain around the axle and hook it into the plate with a padlock. Its not obvious so if the thieves dont check it then they will take off hard and get one hell of a shock and make a hell of alot of noise
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: nah

Post by bogged »

zagan wrote:Get ya self a cold chesil and a hammer and spend an half hour to hour and you'll be through it..
which you could say about any device. 20mins with an oxy will get you through most things too...
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Post by me3@neuralfibre.com »

Where do you keep it?

I'll *watch* it for you :)

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Securing trailers from theft !

Post by 80's_delirious »

Swerve wrote:OK as I got a $hit hot boat I'm worried about it getting stolen.
Best bet is. . . Dont post pics on the internet saying "look at my shithot boat thats not secured. Wanna come and get it?"
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

SIM79 wrote:Take all the wheels of the trailer.
he's parking it in Logan.

The locals will do this for him. Free of charge too.

:finger:
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

its great that everyone is saying put hitch locks etc. on it, but your forgetting the hitch is bolted on. if i was going to steal something that big id sus it out then go buy or steel a new hitch and replace them.

anything that is BOLTED can be undone. padocks are piss easy to bypass and most have picking directions on the net for anyone who wants to do it.

give it to a mate or someone you trust and tell them they can use it just make sure it is safe. im sure it is insured allready as that getting stolen wouldbe painful.

get something made from plate, like 50x4/5mm plate and make something that covers the whole hitch and brake then lock the brakes.do it up with a padlock in an impossible to bolt cut or grind place, done... trust me they are hard to get off when you forget where the keys are, took me 45mins of grindingto cut the whole contraption off.
turbos are nice but i'd rather be blown
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests