Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front crank seal !!!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 14
Joined: Thu Jul 03, 2008 8:21 pm
Location: sunshine coast

front crank seal !!!

Post by elliot »

ive got a 1998 3l diesel with a leaky front frank seal its had 2 seals in it in 6 months the motor has done 170000 k's is this common? my mechanic said he just did a crankshaft in the same motor for the same problem ! is this a common problem with this motor thats done 170,000 km?

cheers :roll:
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Has the old seal cut a small groove in the crank if so it'll leak and it only has to be a small groove also was it a aftermarket or genuinne seal.
plenty of parts on the bench
Top
Posts: 14
Joined: Thu Jul 03, 2008 8:21 pm
Location: sunshine coast

Post by elliot »

Sic Lux wrote:Has the old seal cut a small groove in the crank if so it'll leak and it only has to be a small groove also was it a aftermarket or genuinne seal.


was a genuinne seal but i pulled the timeing belt over off today and it was full of sand and mud so i got a new seal and idler bearing and all fix now cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests