Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bosch Mutli construction drill bits
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Bosch Mutli construction drill bits
First time I have seen em.
I have read a few times on here abot drilling out studs etc and the advise being to sharpen a masonary drill ..
These Bosh units are aleady sharp and I can say they do a pretty decent job on tool steel, but the litrature says you can drill wood, steel or masonary (on hammer) with em.
I have read a few times on here abot drilling out studs etc and the advise being to sharpen a masonary drill ..
These Bosh units are aleady sharp and I can say they do a pretty decent job on tool steel, but the litrature says you can drill wood, steel or masonary (on hammer) with em.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
I have a bosch one that worked a treat, Cant find new stones for it though. ( got it cheap witn no instructions )jessie928 wrote:havent seen them either?
but adding to the subject, when you mention sharpening,
anyone used the DRILL DOCTOR units? i am thinking of getting one as opposed to manual use on d grinder!
Jes
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
bosch multi construction bits
we sell them at work they will drill through steel,timber, bricks, tiles,
probably no good for tilt slab concrete but havnt had any come back
so all good
probably no good for tilt slab concrete but havnt had any come back
so all good
Re: bosch multi construction bits
I only paid $25 for a small pack of 4 with 4mm 6mm 8mm 10mm Good little kit to keep in the toolbox where you never know what you might need to make a hole in.Adam GQ wrote:we sell them at work they will drill through steel,timber, bricks, tiles,
probably no good for tilt slab concrete but havnt had any come back
so all good
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: bosch multi construction bits
have never heard of these bits!!!!!Adam GQ wrote:we sell them at work they will drill through steel,timber, bricks, tiles,
probably no good for tilt slab concrete but havnt had any come back
so all good
They look like a sharp masonary bit. I honestly could not care less if you belive they exist or not.Shadow wrote:im capped, googling is painful at 64kbpsRoldIT wrote:Your google broken? Want us to wipe you ass for you too ... ?Shadow wrote:pics or thier unicorn shit.
Use your imagination

" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 4 guests