Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cutting a Dash, Whats in there??????

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 241
Joined: Fri Jul 11, 2008 8:19 am
Location: Newcastle

Cutting a Dash, Whats in there??????

Post by nellyb1 »

Hey people,

Just wondering if anybody out there has ever cut up a dash?
I cant say that i've done it, so i'm not too sure of what is actually inside the thing.

I'm looking at cutting a hole the same size as a stereo int he top of the dash, above the two centre air vents. I'm looking at mounting a folding touch screen display in it, for the car pc i've gotten a hold off.

I'm guessing i can just cut the foam off carefully, and i'm guessing that there will be some sheet metal in it? Is that right?

Use an angle grinder to cut out the hole.

I know i'm going to have to mod the air vents up, but it will be worth it int he end.

Any ideas would be great cheers.
Last edited by nellyb1 on Thu Nov 27, 2008 10:46 am, edited 1 time in total.
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

What vehicle?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

Friend of mine did it too her Gq to mount a kenwood dvd player. Set it in nicely . Theres metal about 20 mm under the foam
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Top
Posts: 241
Joined: Fri Jul 11, 2008 8:19 am
Location: Newcastle

Post by nellyb1 »

its in a 88 mav.

Right above the two air vents in the middle. Should look ok there.

I wanna set it up vertically in there, so that when i turn the car off the screen goes in and lays flat with the dash.
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

i did this to my gq to fit a laptop in there was fairley easy i just cut the centre out and lowered it about 65mm and welded in a flat base for it and carpeted it and i have 2 slits in my dashmat and when my laptop is on there closed you cant even see its there :)

Image


Image
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 239
Joined: Thu May 06, 2004 11:15 pm
Location: Bavaria, Germany

Contact:
Contact Offroad-Events

Post by Offroad-Events »

InSanE wrote:i did this to my gq to fit a laptop in there was fairley easy i just cut the centre out and lowered it about 65mm and welded in a flat base for it and carpeted it and i have 2 slits in my dashmat and when my laptop is on there closed you cant even see its there :)

Image


Image
Nice !
That's exactly how I plan to mount the Asus eePC in my comp GQ :D
'04 Nissan Terrano 3.0Di ZD30 *pimped*, some Zooks & '87 GQ
Top
Posts: 241
Joined: Fri Jul 11, 2008 8:19 am
Location: Newcastle

Post by nellyb1 »

yeh man that looks sick.

I was thinking of cutting into the dash only enough to fit the unit upright.

Can you remember what the air vents look like inside the dash.
is there just a big plastic bit conneting them, or are they singluar.
Top
Posts: 326
Joined: Mon Aug 23, 2004 10:50 am
Location: Oran Park, NSW

Post by festy »

I mounted my screen on an arm bolted under the jesus bar end, saved cutting up the dash.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 70 guests