I have a 1985 L300 5spd 4x4 van, yeah i know it's a bit of a weapon but it gets me around, at least it did until driving along at 90kph yesterday when it suddenly got hot, blew a puff of white and stopped .
On checking everything it has blown the welsh plug out of the rear of the head and instantly dumped its entire volume of coolant out.
What to do now? The motor still cranks over fine, has spark and fuel but will not fire and run. What is the issue then? Has it completely worn out all compression from the rings as it died? I am stumped.
Thoughts:
Do i rebuild the motor? probably cost more than the van is worth.
Look for a good runner? if so what mitsubishi motors will be a direct bolt up?
Any ideas appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
85 L300 engine problem, major dramas
Moderator: -Scott-
85 L300 engine problem, major dramas
[quote="4runner2.8"]i have one.... and iv done a few long hard pulls with it too.[/quote]
I associate white smoke with coolant in the combustion chamber.
Blowing a welsh plug suggests heaps of pressure in the cooling system - possibly combustion pressure.
Combined, I'd guess at least one, possibly more combustion chambers are open to the cooling system. A head gasket would be a possibility, but more likely something has cracked - probably the head. Have you pulled all the spark plugs and checked them?
You should be able to find a 2.6 to bolt up pretty easily - what engine is in there now?
Blowing a welsh plug suggests heaps of pressure in the cooling system - possibly combustion pressure.
Combined, I'd guess at least one, possibly more combustion chambers are open to the cooling system. A head gasket would be a possibility, but more likely something has cracked - probably the head. Have you pulled all the spark plugs and checked them?
You should be able to find a 2.6 to bolt up pretty easily - what engine is in there now?
Currently has the all conquering 2 litre which did a pretty good job, would sit on 100kph with ease.
I haven't touched the spark plugs yet but will pull them out, what exactly am i looking for to diagnose the fault? thanks.
I haven't touched the spark plugs yet but will pull them out, what exactly am i looking for to diagnose the fault? thanks.
[quote="4runner2.8"]i have one.... and iv done a few long hard pulls with it too.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests