Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

doing the rear axle seal in my 75

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

doing the rear axle seal in my 75

Post by sprungupcruiser »

i've been looking at the exploded view of the rear axle of a 75. the way the picures has been done it looks like the seal is near the diff? is that just the way the drawing is done? i would have thought the seal would have been at the hub end of the axle housing. anyone who has done one before advice would be great, cheers
rob
Top
Posts: 10
Joined: Sat Nov 15, 2008 7:19 am
Location: NEWCASTLE

Post by jimmy_ricard »

mate the seal in question is located on the very outer tube of the housing. pull your axle out and you will see it straight away.
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

thought so, thanks mate
Top
Posts: 534
Joined: Mon Jul 24, 2006 9:38 pm
Location: On The Beach

Post by turkey »

Just done this job myself on my 75 mate, its a piece of piss takes about 30 - 40 mins per side and that was doin the bearings as well. Just be careful with the new seal as there is a small spring in there...
"The Bushpig"
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

ohh cool, should get it done this weekend then.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 12 guests