Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

corona engine swap.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

corona engine swap.

Post by ORSM45 »

i know its not a 4wd but coz its gotta 18R and most of you are familiar with them, i thought its worth a shot

anyway,
does the 18R have the same bell housing bolt pattern as a 22R?
would the fuel injection off a 22R fit the 18R?
are the mounts in the same spot?

what would you recon the best engine swap would be for a corona, dont need to go fast, just want a cheap running, reliable car for transport to work. the 4 spd is K-nackered so is the clutch and the engine has seen better days. so while its coming out i thought id never put it back in, if there were better options.

ive thought about a 3B diesel or similar, but then theres too much stuffing around.

thanks,

MaccA
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

20V 4AGE with T50 5 speed. Will run on a fart in the tank, wont be expensive to do (search the forums at www.toymods.org.au for any info), and has about 117kw standard.

Phill
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

A 22R and 5spd from a later corona will bolt almost straight in. Exhast mods will be about all you need to do. The EFI will not bolt on to the 18R. The bellhousing paturn is the same.
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

i got an 84 corona with a 22re + 3 speed auto with overdrive
goes okay i guess
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

would there be a bitta stuffing around with a 4age?
id like to keep it simple so probably go with the 22R, or similar.
thanks for the ideas.
MaccA
Top
Posts: 282
Joined: Sun Oct 27, 2002 9:15 pm

Post by BeZeRK »

4age good in smaller lighter car.....

22r is bigger motor, stick with it...
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

its gotta tare of about 1000kgs (not much). id like it to be cheap, do you recon a holden 202 would fit and be engineerable? they are the cheapest things ive ever seen. later coronas had the 4M which is a 2.6L 6cyl so id be guessing a 202 would be tight but it would fit. could make it go like the clappers but still cruise to work.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests