need help to pull the side windows out does any one know or can help so i can get the body resprayed
cheers
chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 side windows
Moderators: toaddog, Elmo, DUDELUX
60 side windows
turbo 60 series,soon to be locked
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
go the 40
[url]http://www.allaussie4x4.com/forum[/url]
w
Yep, not an easy job, do it on a hot day and its a "little bit" easier, get a mate to sit inside the back and as you lever it out, get him to cut the urethane with a stanley knife.
i used a rag and a huge screwdriver to pry them out, only suffered a small amount of damage, ten min with the bog and paper it was fixed.
But i got the stuff the auto shop recommended to glue them back in with and it didnt work, i ended up using little self tapping screws from the inside to hold it in, worked a treat.
i used a rag and a huge screwdriver to pry them out, only suffered a small amount of damage, ten min with the bog and paper it was fixed.
But i got the stuff the auto shop recommended to glue them back in with and it didnt work, i ended up using little self tapping screws from the inside to hold it in, worked a treat.
Get out there!!
Who is online
Users browsing this forum: No registered users and 0 guests