Found this interesting a F150 radious arm....?
Another drawing from Pirate....
And some extreme bracing......
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I know they don't work but I am building one anyway, Thread
imagine the weight on that last one! ahha
i got a price back from sky on their bolt on kit... its around $200 to ship the $250 kit =) hehe and worse still with my setup the kit would require modification and is shipped unpainted for that reason.... so factor in "modification" to make it fit and its a pretty costly exercise.
any other thoughts?
i got a price back from sky on their bolt on kit... its around $200 to ship the $250 kit =) hehe and worse still with my setup the kit would require modification and is shipped unpainted for that reason.... so factor in "modification" to make it fit and its a pretty costly exercise.
any other thoughts?
The worst thing about censorship is ███████.
what did you come up with ?alien wrote:imagine the weight on that last one! ahha
i got a price back from sky on their bolt on kit... its around $200 to ship the $250 kit =) hehe and worse still with my setup the kit would require modification and is shipped unpainted for that reason.... so factor in "modification" to make it fit and its a pretty costly exercise.
any other thoughts?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
i went with oztraks - www.sjperformance.com.au
works a treat so far. only had it since last sat and went out sunday for testing - but its already WAY better on and offroad.
works a treat so far. only had it since last sat and went out sunday for testing - but its already WAY better on and offroad.
The worst thing about censorship is ███████.
worked out to cost a heap by the end of it.... i dont want to talk about it... lol
basically i needed perches below the diff again and plates made to hold a square u-bolt (custom made ubolt mind you), then as the kit is made primarily for fords and holdens my kit is custom machined.
All up i estimate around the $1k mark =(
on the up side - itll NEVER bind up and it works - making the title of this thread now incorrect =)
basically i needed perches below the diff again and plates made to hold a square u-bolt (custom made ubolt mind you), then as the kit is made primarily for fords and holdens my kit is custom machined.
All up i estimate around the $1k mark =(
on the up side - itll NEVER bind up and it works - making the title of this thread now incorrect =)
The worst thing about censorship is ███████.
This just had to be reposted from page 1.christover1 wrote:You were missing from 2 adventure Toursdroopypete wrote:Jesus H Christ!!!! I just worked out how long my car has been off the road
I need a good boot up the arse
Peter.
So how are the "wheel bearings" Pete?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
moooooooobssierrajim wrote:This just had to be reposted from page 1.christover1 wrote:You were missing from 2 adventure Toursdroopypete wrote:Jesus H Christ!!!! I just worked out how long my car has been off the road
I need a good boot up the arse
Peter.
So how are the "wheel bearings" Pete?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Update...... You were rightdroopypete wrote:I must have missed this photo, keep a very close eye on your shackle mount as it WILL fatigue and pull away if your car gets much action.hyzook wrote:
Not meaning to offend you but looking the underside of your car, it doesnt look like it gets much of a thrashing so you may be OK.
Peter.
the X member had bent upward, Its a bare chassis again now so I have just finished strenghtening it.Trac bars have now had 3 good test runs - lots of on-road, some mud/rock last week and some sand today... they've 100% solved all my rear wrap and tramp i was getting - not a single driveshaft vibe since fitment =)
Best part is they simply cant bind up! see pic 1 (barely flexing), pic 2 and 3 are under the zuk in that position.
Ill be trimming off that lower mount hole on the shackle plate too - i haven't bashed it on anything yet - but im sure if i dont trim it back i will.
Pics:
Best part is they simply cant bind up! see pic 1 (barely flexing), pic 2 and 3 are under the zuk in that position.
Ill be trimming off that lower mount hole on the shackle plate too - i haven't bashed it on anything yet - but im sure if i dont trim it back i will.
Pics:
The worst thing about censorship is ███████.
linc - yep - an expensive exercise indeed - but it works PERFECTLY - and you cant deny the R&D that goes into it, and the machining costs of all the parts (keep in mind the bushes etc are all machined to my specs).
strength wise - its made to take vehicles putting out over 1000hp... and if it does cop a huge hit, it will break at the heim joint's threads into the bar - so all thats needed to fix it is a heim joint replacement - not like a lot of bars on here that tear mountings off when they fail =)
strength wise - its made to take vehicles putting out over 1000hp... and if it does cop a huge hit, it will break at the heim joint's threads into the bar - so all thats needed to fix it is a heim joint replacement - not like a lot of bars on here that tear mountings off when they fail =)
The worst thing about censorship is ███████.
that much money for some thing that is a bolt on. sorry but i think you got ripped, cost me $320 to have this set up on a old kingswood van a few years ago. they work great, let me go a softer spring set up to get more weight transfer over the back wheels off the line with out breaking uni's from axle warp
cheer up emo kid
dont get me wrong - i know it was expensive - but there was no one else who could do it for me and had the experience in setting up this kind of trac bar... unfortunately i had to bite the bullet and fork out. but you have to admit - its a tidy and top quality job, and i know theres no way i could have built it myself for under $500 as it is, and given the lack of experience i'd likely have spent more money rectifying or re-doing parts that i got wrong (trial and error). in the end, yes its a bolt-on solution and yes its expensive (dare you to see how much it costs to get caltracs made for a zuk!) - but it works and it works well, and given my limited space above the axle it was the best solution - biggest of all is you are all forgetting how much it costs to have things custom made to suit your individual needs... there is no off the shelf suzuki sierra caltracs/oztraks system, so someone has to make the first one =)
The worst thing about censorship is ███████.
Been following the thread with some interest... been good stuff so far. But the geometry certainly taxes the head a bit, and design "oversights" lead to nasty diff damage.
The thing that concerns me most is the actual axle tramp, whilst the diff angle change obviously isn't desirable it doesn't appear to be the most serious problem in terms of causing mechanical damage.
What I'm wondering is whether a horizontal "shock" mounted from the diff - back to the chassis could be made to damp out the axle tramp ?
it seems to me that theres' a significant difference between the fundamental frequency of the axles normal travel and that caused by tramp. and therefore the damper would have little or no effect on normal suspension movement but might be made to damp out the axle tramp .
The "advantage" if this could be made to work is of course that its pretty independant of suspension geometry etc etc - if you can see what I'm getting at.
Sort of like a steering damper
Anyone - any experience / ideas ?
The thing that concerns me most is the actual axle tramp, whilst the diff angle change obviously isn't desirable it doesn't appear to be the most serious problem in terms of causing mechanical damage.
What I'm wondering is whether a horizontal "shock" mounted from the diff - back to the chassis could be made to damp out the axle tramp ?
it seems to me that theres' a significant difference between the fundamental frequency of the axles normal travel and that caused by tramp. and therefore the damper would have little or no effect on normal suspension movement but might be made to damp out the axle tramp .
The "advantage" if this could be made to work is of course that its pretty independant of suspension geometry etc etc - if you can see what I'm getting at.
Sort of like a steering damper
Anyone - any experience / ideas ?
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
I'm just running out of the office MM, but your idea is sound. These were available (and common) in the US in the 80's - they were known as "kicker shocks" and very recent F150 fords used them too.
I've played with the idea of using one of my old Gwagen Bilsteins in this application - they are super stiff.
Steve.
I've played with the idea of using one of my old Gwagen Bilsteins in this application - they are super stiff.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
There's a number of references on the net re Kicker Shocks.... also a Bilstein listing for one to suit a Mustang - and I have healthy respect for Bilstein.
Given the significant mass and torque of the Mustang they could well be a candidate for a 4WD.
Rancho also appear to do them - hmmm..... interesting
Also another shock based system has a coil over and runs from the top of the U bolts to the forward spring eye. Not really practical for my application but another example showing the principle.
Overall might not be perfect but seems potentially much more forgiving of the complex geometry changes seen with leaf springs - well worth following up IMO.
Given the significant mass and torque of the Mustang they could well be a candidate for a 4WD.
Rancho also appear to do them - hmmm..... interesting
Also another shock based system has a coil over and runs from the top of the U bolts to the forward spring eye. Not really practical for my application but another example showing the principle.
Overall might not be perfect but seems potentially much more forgiving of the complex geometry changes seen with leaf springs - well worth following up IMO.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Well it has been 10 month or so, and so far no problems at all, not one 
the springs that were new when I started this experiment still look the same, it launches like a demon, doesn't make any noise and apart from the odd squirt of grease has not required any attention at all.
I know a few of you are after pics, but I am waiting for advice from my patent lawyer
(OK OK I am slack)
Peter
the springs that were new when I started this experiment still look the same, it launches like a demon, doesn't make any noise and apart from the odd squirt of grease has not required any attention at all.I know a few of you are after pics, but I am waiting for advice from my patent lawyer
(OK OK I am slack)Peter
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
droopypete wrote:Well it has been 10 month or so, and so far no problems at all, not one
I know a few of you are after pics, but I am waiting for advice from my patent lawyer
Peter
Just leave it down at a Macca's one weekend, im sure someone will take a pic there
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
He has done a runner with my patents to the Bahamas, but my zook is still fine, except for a blown rear diff and grass growing in the winchlove_mud wrote:droopypete wrote:That was low
So what has your patent lawyer said so far ?
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Who is online
Users browsing this forum: No registered users and 71 guests