Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ls2 6.0 l in 2000 hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 71
Joined: Sun Jul 06, 2008 10:34 am
Location: moorebank

ls2 6.0 l in 2000 hilux

Post by nath37 »

hey guys i can get a ls2 6.0l for my lux wat yous rekon too much fiddling round to put it in or wat ??
NEW RIG ....HARDTOP SIERRA ,3LINKK COILREAREND,37 INCH BF KRAWLERS,2 INCH BODYLIFT,HILUX DIFFS ,FULL EXO CAGE CRAWLIN GEARS ,COROLLA AUTO MOTOR
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

be a squeeze- How much bigger is an LS2 compared to a 1UZ- I know the 1UZ is pretty tight.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

despite the fact that it wont fit.

it will blow every part of the hilux drivetrain to pieces.
Top
Posts: 750
Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast

Post by johnsy86 »

take some measurements make sure its gunna fit and go for it
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

price up a 40 series rear diff, gearbox and transfer case then- the 8" diff wont last!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

price up a 40 series rear diff, gearbox and transfer case then- the 8" diff wont last!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 316
Joined: Fri Jul 30, 2004 11:48 pm
Location: Rockingham, Western Australia

Post by suzi_on_46s »

gq diffs front and rear

beefy th700

that should hold up
waiting for another project....................
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

suzi_on_46s wrote:gq diffs front and rear

beefy th700

that should hold up
May as well bolt the hilux body to the GQ and fit the engine.
:rofl: :popcorn: :snipersmile:
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

I am fitting an L98 6 litre into my Lux but mine wont be a road driven vehichle.
I have no idea how it is going to fit but I will make it fit :D
I plan on mid mounting it through the firewall a bit too.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 15
Joined: Tue Sep 09, 2003 9:39 pm
Location: sydney

Post by carmino »

The ls1 or ls2 will fit in a hilux body. Theres a few running around in 2wd hiluxs and id imagine the engine bays are identical between a 2wd and a 4wd. Heres a pic of one. The inner wheel guards are modified cause the car is air bagged and it allows more room for the tyres to tuck up. There was more room in the engine bay with the original inner guards.


http://img.photobucket.com/albums/v506/ ... inebay.jpg
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

I believe an LS2 is dimensionally smaller than a 1UZ
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

I would go for it, they are a great engine, and fairly light. You will need to use a truck sump, prob need custom extractors, etc. I would recomend using the holden auto trans, Will be stronger than any hilux box, and it is much softer on the diffs etc. You may want to look at rear mounting the radiator, Not easy to get a good sized radiator in the front a V8 hilux.

Sure you may snap diffs, and axles, blah blah, But thats half the fun :D
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

dogbreath_48 wrote:I believe an LS2 is dimensionally smaller than a 1UZ
Correct



Jeez, for the dumbarses above, just because its capacity is bigger, doesn;t mean the physical size is :roll:
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 316
Joined: Fri Jul 30, 2004 11:48 pm
Location: Rockingham, Western Australia

Post by suzi_on_46s »

LOCKEE wrote:
suzi_on_46s wrote:gq diffs front and rear

beefy th700

that should hold up
May as well bolt the hilux body to the GQ and fit the engine.
problem solved
waiting for another project....................
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 43 guests