Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ Patrol roof light bar

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 142
Joined: Mon Sep 17, 2007 8:33 pm
Location: Macedon

MQ Patrol roof light bar

Post by TURBOMQ »

Hi guys looking for a light bar for my roof to mount 4 spotlights onto, and how does everyone run there wiring through the roof or top of door?
any help would be great
cheers
Benny
mq patrol, zorst, spotties, lft ect
Posts: 65
Joined: Sun Sep 25, 2005 10:07 pm
Location: Ipswich, QLD

Post by lkgrainger »

Here are a couple of pics of my rig. I went cheap with a $50 set of roof racks and $30 ea spots (although I will be upgrading these at a later date).
I put the wires (2 power wires so I can control a set of 2 and a set of 3 and an earth) under the sill on the left side pushed through a rubber grommet.
It works for me so I'm happy.

Image

Image
SWB Maverick
3in Sus lift, 2in Body lift. Sitting on 33in Bighorns.
Posts: 186
Joined: Wed Aug 30, 2006 3:06 pm

Post by Chook350 »

i re did mine, it used to come up through the roof on the drivers side, now i have 2 peices of 5mm twin core threw 2 gromets in the centre of the roof, n 1 for the uhf coax, it looks fine, nice n neat can barely notice it
Posts: 65
Joined: Sun Sep 25, 2005 10:07 pm
Location: Ipswich, QLD

Post by lkgrainger »

I was going to go that way but didn't want to take apart the lining. Maybe on the next one. LoL
SWB Maverick
3in Sus lift, 2in Body lift. Sitting on 33in Bighorns.
Post Reply

Who is online

Users browsing this forum: No registered users and 132 guests