Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ with a V8 -Exhaust Advice- clearance issues

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 74
Joined: Mon Feb 21, 2005 7:45 pm
Location: Buried in the AORC!

GQ with a V8 -Exhaust Advice- clearance issues

Post by petri »

I've got a shorty gq with a 350 block.
The R/H pipe just after the extractors has clearance issues due to the drive shaft, starter motor, diff pumpkin etc....

Can anyone with a similar setup advise me on how they have plumbed the r/h side?... either squeezed in or under the sump to join the other side?

Currently mine has 2' pipe that goes under the sump to the Y piece but i'm sure there's a better way to do it..

Any pics would be awesome..
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

http://www.outerlimits4x4.com/ftopic129251.php

Some exhaust clearance discussion happening in this thread.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 74
Joined: Mon Feb 21, 2005 7:45 pm
Location: Buried in the AORC!

Post by petri »

That's great! I'll start reading up!
Cheers :D
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

easy option for you run the rh pipe foward, around the front, then down the lhs
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

legal or illegal option....?

i vote straight out the header
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

My right hand pipe (2 1/4) runs tight to the block and runs under my bell housing and joins on to the left side just becide the join of the gearbox to the bell housing, then into 3'' mandrel systerm all the back..

My front shaft does touch the pipe, but only just and when under full compression, if u space your bump stops, this can be avoided...

Skippy
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 74
Joined: Mon Feb 21, 2005 7:45 pm
Location: Buried in the AORC!

Post by petri »

skippy's GQ wrote:My right hand pipe (2') runs tight to the block and runs under my bell housing and joins on to the left side just beside the join of the gearbox to the bell housing, then into 3'' mandrel system all the back..

My front shaft does touch the pipe, but only just and when under full compression, if u space your bump stops, this can be avoided...

Skippy
That sounds good... Is there any chance I can get a pic of that so i can show it to the exhaust lads...... pretty please?.......
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

i should be able to sort something out... the only problem is i live in townsville now and the forby is on the goldie at the moment... but i should be able to get some to u before monday... :armsup:
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

petri wrote:
skippy's GQ wrote:My right hand pipe (2') runs tight to the block and runs under my bell housing and joins on to the left side just beside the join of the gearbox to the bell housing, then into 3'' mandrel system all the back..

My front shaft does touch the pipe, but only just and when under full compression, if u space your bump stops, this can be avoided...

Skippy
That sounds good... Is there any chance I can get a pic of that so i can show it to the exhaust lads...... pretty please?.......
Give me your email and ill send you some pics.

MAtt
Top
Posts: 74
Joined: Mon Feb 21, 2005 7:45 pm
Location: Buried in the AORC!

Post by petri »

madrolla68 wrote:
petri wrote:
skippy's GQ wrote:My right hand pipe (2') runs tight to the block and runs under my bell housing and joins on to the left side just beside the join of the gearbox to the bell housing, then into 3'' mandrel system all the back..

My front shaft does touch the pipe, but only just and when under full compression, if u space your bump stops, this can be avoided...

Skippy
That sounds good... Is there any chance I can get a pic of that so i can show it to the exhaust lads...... pretty please?.......
Give me your email and ill send you some pics.

MAtt
Cheers gents.
email is : petripushi@gmail.com

Thanks a million!
Top
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

petri wrote:
madrolla68 wrote:
petri wrote:
skippy's GQ wrote:My right hand pipe (2') runs tight to the block and runs under my bell housing and joins on to the left side just beside the join of the gearbox to the bell housing, then into 3'' mandrel system all the back..

My front shaft does touch the pipe, but only just and when under full compression, if u space your bump stops, this can be avoided...

Skippy
That sounds good... Is there any chance I can get a pic of that so i can show it to the exhaust lads...... pretty please?.......
Give me your email and ill send you some pics.

MAtt
Cheers gents.
email is : petripushi@gmail.com

Thanks a million!
Email sent man.

Matt
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 57 guests