hi all my rear brakes on my nissan gq tray back are getting very hot even after 20 min drive the left side is leakig oil not much but just wondering whats causeing them to lock on
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gq rear brakes
Yup, very common for the rears to seize on GQ's.. Not a hard job to rebuild, but if your unsure, run into ABS or similar.IPCH wrote:Seems to me that your calliper has siesed and draging on the disc. Remove the caliper and see if you can push the pads back in. Akit cost about $60 somthing from memory from abs. $100plus for a new one.
Yes bursons, ask for a caliper rebuild kit.. Or ABS Brakes.luggys lux wrote:what do i ask for at the shop would bursons sell them kits thanks
I think also from memory on the GQ, there are different levels of kits.. some come with the piston, some dont... the piston is FAWKIN expensive (going back 4yrs memory here).. so check it before you buy it.
m
Make sure you put some oil on the seals and pistons when pushing them back into the calipers. This will help ... 
Lifted turbo GU , 900blade .. TLR1000 "the dark side" , Boat ,
allisterrenee wrote:
Make sure you put some oil on the seals and pistons when pushing them back into the calipers. This will help ...
Do Not Use Oil!!! It will swell the seals, use brake fluid only
Brake fluid is what i was trying to say ,sorry if i confused anyone , When i said oil , i would of thought it was obvis i ment brake fluid. Sorry will check my wording more carfully next time ,
Lifted turbo GU , 900blade .. TLR1000 "the dark side" , Boat ,
Yes and No...., just pull the spring off the diff and it wont do any thing any more.. but not likely the problem... it will be your calliapers causing the problem....
the seals around the piston would have gone hard and not alowing the piston to return correctly, and i would say your caliaper slides will be sticking as well, all common problems with patrols
the seals around the piston would have gone hard and not alowing the piston to return correctly, and i would say your caliaper slides will be sticking as well, all common problems with patrols
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D
www.roverpark.com
www.roverpark.com
If they are really seized, which is common then you'll need to pop the piston out with the brake pedal. ie pop one side, clamp off the that hose and then pop the other. If they are like this then you'll need new istons as well.
I just spent $235 (NZ) to put pistons and seal kits into all four corners. Well worth the time and money to have all fours corners working perfectly.
Another tip is to use a lot of rubber grease on the inside of the rubber boot. It helps keep shit out of there and makes the piston last longer.
I just spent $235 (NZ) to put pistons and seal kits into all four corners. Well worth the time and money to have all fours corners working perfectly.
Another tip is to use a lot of rubber grease on the inside of the rubber boot. It helps keep shit out of there and makes the piston last longer.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Who is online
Users browsing this forum: No registered users and 12 guests