Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series steering arms on late 40 series hub

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

60 series steering arms on late 40 series hub

Post by Clanky »

Anyone know if 60 series steering arms will fit onto late model disc brake 40 series steering hubs?

Checked the bible and found that 75 series fit late 40's. Are these the same as 60's?
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

60 arms are all good but i will check what joints we used think they were 60 ones but will double check tomorrow
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: 60 series steering arms on late 40 series hub

Post by bad_religion_au »

Clanky wrote:Anyone know if 60 series steering arms will fit onto late model disc brake 40 series steering hubs?

Checked the bible and found that 75 series fit late 40's. Are these the same as 60's?
yes to both. steering joints are the same between 60 and 75 too.
Spit my last breath
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

Excellent
Thanks for the heads up.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests