Anyone know what thread the 60 series tierods and drag link joints are where they screw into the tube.
They measure 22.8 x 1.5pitch.
Checking the charts it could go either M22 x 1.5 or a UNF 5/8 x 14.5tpi.
I am backing metric but I want to confirm as the M22 max dia is 22.0mm whereas the 5/8 is 22.8mm.
Could be due to the thread being rolled.
Had a look in the bible and cant locate the info
Can anyone confirm?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series tie rod threads
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests