Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40series - front speaker placement

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

40series - front speaker placement

Post by twr7cx »

I'm looking for ideas on where I can fit some speakers in the front of an FJ45. It's a ute, so only have the front cab to work with. If you've done it, where'd you put them? Pictures are always nice...
Posts: 147
Joined: Sat Aug 04, 2007 1:28 pm
Location: Sydney

Post by little rusty »

mine are at the front bottom of each door - the bit you probably kick every time you get in and out... no photos sorry. Worked well there as there is plenty of room without fouling glass. overhead console would work
even when you spell out commonsense to the RTA they still ignore it!
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

Post by twr7cx »

little rusty wrote:mine are at the front bottom of each door - the bit you probably kick every time you get in and out... no photos sorry. Worked well there as there is plenty of room without fouling glass. overhead console would work
What size did you get in there?
I have a set of 4" and 6x9" sitting here, but would consider buying a 5" or 6" set if these are the biggest I can fit.
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

Mounted some JVC 6" Splits on my doors with those pre made pods you can buy.

Image
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Posts: 147
Joined: Sat Aug 04, 2007 1:28 pm
Location: Sydney

Post by little rusty »

mine were just 4" speakers... i am not much of an audio buff so suited me fine...
even when you spell out commonsense to the RTA they still ignore it!
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Not on my 40 but I used to have a Subaru Brumby with the same problem.

I ended up making a tower that sat between the two seats up against the rear cabin wall and had 2 6x9s mounted vertically.

It was bolted to the floor and stuck to the rear of the cab with industrial velcro. I used to hammer down some knarly fire trails in that thing and it never moved.

Otherwise I would look at a roof console that sat behind your head rather than over the windscreen and mount the speakers there. No floor space lost, nice and high out of the way, could easily fit an amp in there too.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

my 45 has speakers in the overhead console and a pair behind the seat,well thats how previous owner set them up,only heard the console ones work
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

Post by twr7cx »

I think I'm going to go with 4"'s in the doors, and put the two 6 x 9's under the passenger seat - I've got these speakers lying around already from a previous vehicle.
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

I'd be surprised if the 6x9's fitted under the seat.

You would be best to use the same setup as Twisty. Pods with 6" splits. Try to get pods that don't stick out too far though as they will bump on your legs and become annoying. Run the splits off an amp and at least you will always hear the music and won't bust the speakers. I went through 3 sets of 6x9's before going to spilts and haven't looked back.
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

Gday, if u have the doors with the quater glass u wont need pods. I have pods for my 6 inch splits in my doors,i dont have quater glasses. Also have 6x9s in the overhead console and 12'"inch sub under seat, putting another in soon.. It get pretty loud in there haha. Well enough to make all the other annoying rattles go away.
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

Post by twr7cx »

Matt_88 wrote:Gday, if u have the doors with the quater glass u wont need pods. I have pods for my 6 inch splits in my doors,i dont have quater glasses. Also have 6x9s in the overhead console and 12'"inch sub under seat, putting another in soon.. It get pretty loud in there haha. Well enough to make all the other annoying rattles go away.
Looks like I am in luck then:

Image

I'm not planning anything that extreme like yours but. Just wanted some speakers there for a bit of tunes. The utes not driven very often, as I've got a supercharged XR6 for my daily driver.
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

Post by twr7cx »

Ricko wrote:I'd be surprised if the 6x9's fitted under the seat.
Are you surprised yet?

Image
Image

I'm going to go with the 4"'s in the door (although I've found 2 6" speakers now, so might get some spacers and use them rather) and 6 x 9's under the seat for a bit of bass increase.
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

overhead console.

Bit of plywood and white sheeting. Keep head unit and speakers up there so wiring is contained. Also a sweet place to hide things when camping.

But I really did it so I could keep the original AM radio :cool:
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

cruiser60series wrote:overhead console.

Bit of plywood and white sheeting. Keep head unit and speakers up there so wiring is contained. Also a sweet place to hide things when camping.

But I really did it so I could keep the original AM radio :cool:
I fitted a 10" sub in the overhead console.
hands and mums dont count!!!
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

twr7cx wrote:
Ricko wrote:I'd be surprised if the 6x9's fitted under the seat.
Are you surprised yet?
Yes, yes I am. Different to my 42. Lucky bastard...

The reason I like the pods is that is gets a bit of the speaker out of the door. Given that water will go inside the door when it rains, it offers a little less of the speaker to be water affected. It is also easier to then apply some plastic sheeting over the speaker to further stop water getting into it.

Since those 6x9's fit, definatley keep em until they blow. Try not to get too much bass from them though as you won't hear the distortion that leads to the damage due to cabin noise, tyres, rattles, missus bitching etc.
Posts: 93
Joined: Wed May 14, 2008 11:36 pm
Location: Nth Tassie

Post by uted1 »

My kick vents have been welded shut, since someone used them to break in and steal my last stereo
So i made kick panels for my front speakers. My 6x9s are behind the seats mounted in a 12mm mdf panel.

Image

Image
Post Reply

Who is online

Users browsing this forum: No registered users and 131 guests