Tcase flange nut socket size?

[brendan_h]

think this will be good for the bible.

what size socket do you use on the output flange nuts on the tcase?

and also the wheel bearing nut socket is that a 51mm socket?

[want33s]

think this will be good for the bible.

what size socket do you use on the output flange nuts on the tcase?

and also the wheel bearing nut socket is that a 51mm socket?

I can't remember the size of the T-case nuts.. About 30mm I think??? I don't have a spare case to measure.
The wheel bearing nuts are 50mm definately.

Jas.

[Mike E]

i'm pretty sure i used a 27mm socket on mine

[brendan_h]

30bucks for an impact socket need accurate figures

for the wheel bearings 50mm socket?

[Mike E]

i went and checked and on my wt and nt case i used a 27mm socket

[brendan_h]

thanks

[brendan_h]

thanks

[want33s]

30bucks for an impact socket need accurate figures

for the wheel bearings 50mm socket?

You don't need accurate figures you need to search.
There is a few threads with this info in them.
'Swivel hub rebuild' is one.

[GRPABT1]

we should bible the link to the trailgear case gears intructions though and probably Izook's build pages

[Adsport]

24mm for 1.0L

27mm for 1.3L

[mrw82]

24mm for 1.0L without switch

27mm for 1.3L and 1 litre with switch

[Gwagensteve]

24mm for 1.0L without switch

27mm for 1.3L and 1 litre with switch

X2.

Steve.