Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

v8 diferences

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 11
Joined: Sat Jul 03, 2004 1:02 am
Location: South Brisvegas

v8 diferences

Post by PatS »

Hi folks..

been reading and looking at the various V8's now available.. eg

Chevy, holden 308/304 LS1 windsor efi and the toyo iufze etc, okay so what's the best for the conversions.

Chevy 350 $3000 No box expensive parts for rebuild
Holden LS1 304 $2000 T700 box common and parts good
Ford EFI 302 $2000 with box common and parts good
Toyo/Lexus ?? $2500 with Box Now common Parts ??
Looking at the V* into the 40 but which one ???..

This may raise some discussion and loyalties.. :twisted:

Pat S
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

motor

Post by stock 4runner »

you must have got dud info on the chev i have found parts very cheep for them especially compared to ford
Posts: 206
Joined: Tue Apr 12, 2005 1:59 pm
Location: Rockhampton QLD

Post by Pauwolf »

ls1 and 304 completely different motors,

ls1 is a 3rd generation chev small block (even the commodore ones)
304 is obviously holdens efi V8 based on the old 308 V8 (which was based on buick 330 V8)

if you are putting it in a landcruiser, you would be hard pressed to go past the toyota V8, a 2uzfe (4.7 litre) can be had for $4500 or a 1uzfe (4 litre) for under $2000 complete with everything for a conversion, they are tough as nails, easy to get parts for and toyota

having said that I have always used Holden 304 and 308 and had pretty good success with them, mainly because they are cheap to buy and modify, but they lack power by todays standards

if you are after big power, a ls1, ls2 or 6 litre ls6 or other derivatives will deliver the most power per $ input, parts are cheap and plentiful thanks to the commodore crowd

All of the motors you mentioned are good units, IMHO, the ford will be the dearest, then the toyota, chev and the humble old holden the cheapest but not necessarily the best

have fun, V8 s are a blast

Paul
91 FJ 80 Project on the go - air lockers, 3in lift, super duper 3F, 36" pedes, toyota V8 getting prepped now
Posts: 148
Joined: Sun Dec 23, 2007 12:46 am
Location: mildura

Post by khany427 »

chevs are by far the cheapest mate, dunno where you got your info.
ford definatly the most expensive,
all the motors you have listed are good though, just a matter of what you want really, and what deals you can find.

chevs are probably the most common for 40series conversions aswell, theres generally chev to 40 conversion kits on ebay and trading post.

you MIGHT have problems finding a conversion kit for the toyota v8 into a 40, i dont really know but imagine you would.
WANTED!... XA/B/C coupe parts. PM me if you got anything!
Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests