Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Yeah they are a pretty easy fit, just remove the runners and make a bracket to adapt. minimal work. Just need a couple of pics of th bracket to get going
I've got au seats in my 94 single cab hilux, just welded a bit of angle on the front of the runners and bolted them in, pretty simple for a hilux anyway
cheers Dan
Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
I've got the seats, sorta working through it. I think by cutting of the ford runners and welding a piece of steel across should bolt onto the toyota runners. Hopefully someone has some pics otherwise i will post up when i sort it out.
How comfy are the AU seats? Have a lot of adjustment in them?
The missus has been nagging me about how uncomfortable the GXL seats are on long trips. Should take the zook more often so she has something to complain about I reckon!
More Suzuki parts going to the big Suzuki Heaven in the sky!
I have AU xr8 seats, gotta make sure there the ones without the pretensioners so you can adapt the seat belt buckle on. Compared to the GXL seats they are in another league. Not sure on the base model ones, nut both only cost 350. The steel is $10 so makes them a lot cheaper than one arb one
