Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nissan Patrol electrics

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2691
Joined: Sun Sep 03, 2006 7:31 pm
Location: where ever the track takes me

Nissan Patrol electrics

Post by muddydigger »

Guys im trying to figure out why my right hand high beam wont work.
Ive tested the bulb and its fine,t here is no power to the high beam line on that light.
ive tested the fuse in the fuse box (footwell) and its fine too.
Is there another fuse box somewhere I cant find? or any other suggestions?
Chears its 91 Ti patrol
For Kart racing information please visit our site at www.auskart.net
Posts: 139
Joined: Fri Apr 13, 2007 3:18 pm
Location: Melbourne

Post by 1TUFFGQ »

Have a look at the loom where the wires come out for the right head light. Mine were buggered and were causing a short in the system. Kept losing my right head light because of the fuse blowing. Yours could be completely separated hence no fuse blowing.
GU Patrol intercooled TD42T, lifted, Cheezy sliders, ARB air locker, beadlocked Claws, Warn winch
Posts: 80
Joined: Fri Oct 14, 2005 11:34 pm
Location: melbourne

Post by mudtrekka »

Possibly the headlight switch, which is cause for many h/light problems on early GQ's.
Posts: 2691
Joined: Sun Sep 03, 2006 7:31 pm
Location: where ever the track takes me

Post by muddydigger »

Fixed.
Seeing as i had feed to my left high beam, I re wired to a fused relay and then ran heavy duty wire to the high beams.
For Kart racing information please visit our site at www.auskart.net
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

Could be the actual high beam stalk on the steering column is being dicky.... I seem to remember that the complete power for the headlight runs through this switch? have a look at that....

marin
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests