Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Handbrake Q

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 329
Joined: Tue Jun 28, 2005 3:08 pm
Location: Sydney

Handbrake Q

Post by Badass Bundy »

Gday all,

A while ago I posted on here regarding my father's steep driveway and ways of getting the sedan down it without scraping. Update: Nothing has been done about the driveway.

Anyway......now he has given up on the idea of modifying the driveway (read $$$$$$$). So he had decided to park the car (automatic) half way down the steep driveway with the handbrake on. I was just thinking (first mistake), this cant be good for the handbrake????

Am I right or have I had too many xmas egg noggs? :roll:

Oh and merry xmas to you all.
80 Series 1HD-T
Front and Rear Factory Lockers
Rear drawer system with fridge slide
10,000Lbs Winch
Built for touring
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Thats what the handbrake is built for so it shouldnt be a problem, but in most vehicles, the handbrake will not hold a vehicle on a steep slope. So in a manual gearbox you leave it in gear, and the engine compression will greatly help holding it, and in an automatic, when its in park, a little latch locks the transmission up so it also greatly helps prevent the car from rolling.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 329
Joined: Tue Jun 28, 2005 3:08 pm
Location: Sydney

Post by Badass Bundy »

PJ.zook wrote:Thats what the handbrake is built for so it shouldnt be a problem, but in most vehicles, the handbrake will not hold a vehicle on a steep slope. So in a manual gearbox you leave it in gear, and the engine compression will greatly help holding it, and in an automatic, when its in park, a little latch locks the transmission up so it also greatly helps prevent the car from rolling.
It is a 2008 model Peugeot and its parked on this steep driveway for long periods of time at a few days at a time. Anyway no worries. Thanks for that.
80 Series 1HD-T
Front and Rear Factory Lockers
Rear drawer system with fridge slide
10,000Lbs Winch
Built for touring
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Wheel chocks...
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Badass Bundy wrote:
PJ.zook wrote:Thats what the handbrake is built for so it shouldnt be a problem, but in most vehicles, the handbrake will not hold a vehicle on a steep slope. So in a manual gearbox you leave it in gear, and the engine compression will greatly help holding it, and in an automatic, when its in park, a little latch locks the transmission up so it also greatly helps prevent the car from rolling.
It is a 2008 model Peugeot and its parked on this steep driveway for long periods of time at a few days at a time. Anyway no worries. Thanks for that.
I'm tipping he's wrenching the handle up really hard isn't he - will stretch the cable quicker. Probably better off only applying the handbrake lightly and letting the park brake do the work.

As above the best option would be some sort of chocks to take some load off the park/handbrakes.
Tetanus rolling on 37's
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Get him to retrofit a Hilux handbrake, they work really well apparently :roll:

Best bet is wheel chocks, big rubber ones, cause reefing the handbrake on hard will eventually see it needing more and more adjustments,

As others have already said that is....
Posts: 329
Joined: Tue Jun 28, 2005 3:08 pm
Location: Sydney

Post by Badass Bundy »

lump_a_charcoal wrote:Wheel chocks...
Yeah I suggested dyna bolting a wooden sleeper on the driveway to be used as a chock.

Thanks guys!
80 Series 1HD-T
Front and Rear Factory Lockers
Rear drawer system with fridge slide
10,000Lbs Winch
Built for touring
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

ive done this with my ute.
and had to chase after it as it dragged the rear wheels down the drive. on pebble-crete, so not the grippiest substance but it was dry and not slippery.

i would be very careful about what he is doing.

how old is the house? driveways on new houses have to conform to legislations regarding slope to the road and the steepness and drive over angle.
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Struth wrote:Get him to retrofit a Hilux handbrake, they work really well apparently :roll:
Yep will never wear out......... actually you give up on even trying to use it.
Hilux rear drums aren't a lot better IMO glad to see mine hit the scrap metal bin.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

i really don't see what the issue is here............gotta love the 'p' setting on those autos.. ;)
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 14
Joined: Thu Nov 27, 2008 9:39 pm
Location: sydney

Post by mortis35 »

bolt a winch to the bonnet , wrap the cable around a tree (or front tap) and you will never have to worry about it again.. :D


Wheel chocks are the way to go.. :)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests