trying to find sum bodylift blocks in a kit for a 84 nb pajero lwb and maybe sum extended rear leaf hangers?
remember seing sum on here sumwhere but can't find them anymore
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
series 1 bodylift
Moderator: -Scott-
hey mate,
I made my own bodylift. Used 60mm nylon rod cut it to the size of the BL i wanted. Drilled a hole in it with a drill press, got some new high tensile bolts, washers, nuts and spring washers. If your handy with tools its an easy and cheap option.
I had no worries getting it passed for rego with a 3 inch bodylift and 33" muddies.
Cheers
Dan
I made my own bodylift. Used 60mm nylon rod cut it to the size of the BL i wanted. Drilled a hole in it with a drill press, got some new high tensile bolts, washers, nuts and spring washers. If your handy with tools its an easy and cheap option.
I had no worries getting it passed for rego with a 3 inch bodylift and 33" muddies.
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
yeah im preety handy with the toolsdans-paj92 wrote:hey mate,
I made my own bodylift. Used 60mm nylon rod cut it to the size of the BL i wanted. Drilled a hole in it with a drill press, got some new high tensile bolts, washers, nuts and spring washers. If your handy with tools its an easy and cheap option.
I had no worries getting it passed for rego with a 3 inch bodylift and 33" muddies.
Cheers
Dan
did you have to modify your fuel or brake lines and did you have any problems with your gear leavers
brake lines dont need to be modified. You do need to extend the fuel tank filler pipe with some stainless steel exhaust pipe and 2 pipe clamps. The gear levers may need to be modified. I had to cut some floor out for mine as I couldnt fully engage reverse or first gear. You need new heater hoses, extend the steering rod from the body to the power steer box, move the radiator down so the hoses dont need to be extended and the fan doesnt hit the lower outlet. Thats about it.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Who is online
Users browsing this forum: No registered users and 21 guests