Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front 60 shaft longer then 40 shaft????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 205
Joined: Sat Jun 28, 2008 3:55 pm
Location: South Brisbane

Front 60 shaft longer then 40 shaft????

Post by phil94delica »

Hi I was just wondering if anyone knows if a 60 series front drive shaft is longer then the 40 series. I have a forty and need a shaft thats 2" longer and a 60 shaft would be an easy fix if its longer.
Electrical !!!
www.philthesparky.com.au

Offroad Photography !!!
www.offroadphotography.com.au
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

5 speed is 100mm longer than 4 speed
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

5 speed gear box is 90mm longer
i tried a 60 front tail shaft when i converted to a 5 speed but it was to long by about 75mm i ended up getting a spare rear tail shaft cut down to suit
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

what about the rear shaft. does this need to be modded if coverting a 4 speed to a 5 speed on a 45??

sorry bout the hijack
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

Matt_88 wrote:what about the rear shaft. does this need to be modded if coverting a 4 speed to a 5 speed on a 45??

sorry bout the hijack
yes shortend
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

So the front and rear shafts both have to be shortened yes?? or does the front have to be longer??

Does anyone have any idea at all at how much someone would be looking at to get this done??
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

i just paid 320 for a shortened rear shaft with both new unis

front i did myself from a spare rear shaft i had lying about
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Matt_88 wrote:So the front and rear shafts both have to be shortened yes?? or does the front have to be longer??

Does anyone have any idea at all at how much someone would be looking at to get this done??
Rear has to be shortened and front has to be extended. I got a front 60 series shaft with double cardan and shortened that for the front of mine.

Ring Driveline Services for a price.

Stafford is 3356 1604
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

OR get the shafts from the factory 5 speed model.


:lol:

They exist, but are rare as!
hands and mums dont count!!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 100 guests