Hi all
I thought I had a water pump on the way out but tracked the 'whirring' noise to the power steering pulley, do i have to replace the pulley itself or
is it a case of fitting a new bearing?
Cheers
J
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Power steering pulley
Power steering pulley
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
False alarm - it was the water pump after all so I bought a new one from BNT and will put it on tomorrow. ($85 kiwi for a new pump made in Japan, I'm a happy chappy
).
Footnote: I phoned Nissan and they didn't have any diagrams or listing for a power steering pulley bearing, BUT I did phone a p/steering guy in town who said there is a bearing in behind the pulley and yes it can be replaced. So all good.
Cheers

Footnote: I phoned Nissan and they didn't have any diagrams or listing for a power steering pulley bearing, BUT I did phone a p/steering guy in town who said there is a bearing in behind the pulley and yes it can be replaced. So all good.
Cheers
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Who is online
Users browsing this forum: No registered users and 1 guest